3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
This & That >> Marketplace >> [W] 2 x 256 PC-100 or 133 ram modules http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1183890880 Message started by gdonovan on 08.07.07 at 12:34:40 |
Title: [W] 2 x 256 PC-100 or 133 ram modules Post by gdonovan on 08.07.07 at 12:34:40
Anyone have any for sale?
|
Title: Re: [W] 2 x 256 PC-100 or 133 ram modules Post by gamma742 on 09.07.07 at 04:19:07
All I have left is 1 stick of 512 PC133 64X64
Not all of the older motherboards can accept 512 in one slot, depends on the board and the BIOS :-/ |
Title: Re: [W] 2 x 256 PC-100 or 133 ram modules Post by gdonovan on 09.07.07 at 16:09:16
I'll try to check later today.
The workstation is chugging with just 256mb, driving me crazy. |
Title: Re: [W] 2 x 256 PC-100 or 133 ram modules Post by jandarsun8 on 09.07.07 at 17:50:37
I'll see what I have laying around the house, I know I have a couple of 128 meg sticks but 256 I'm just not sure. Those are coming in short supply these days.
|
Title: Re: [W] 2 x 256 PC-100 or 133 ram modules Post by gdonovan on 09.07.07 at 19:05:02
Needs to be a pair of 256, a single 512 won't work.
http://www.intel.com/support/motherboards/desktop/ca810e/sb/cs-012808.htm http://www.intel.com/support/motherboards/desktop/CA810e/sb/CS-012797.htm Gary |
Title: Re: [W] 2 x 256 PC-100 or 133 ram modules Post by IG88 on 10.07.07 at 01:47:56
looks like my msi board 2 ram slots
i`m in the same position lots of 128 no 256 new stuff cost more than new ddr |
Title: Re: [W] 2 x 256 PC-100 or 133 ram modules Post by gamma742 on 10.07.07 at 04:57:34
same here, lots of 128s
|
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |