3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> VSA-100 16MB mod?
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1263492786

Message started by exxe on 14.01.10 at 19:13:06

Title: VSA-100 16MB mod?
Post by exxe on 14.01.10 at 19:13:06
is there a easy way to reduce a VSA-100 based card to 16MB?

other BIOS?
i cant find a BIOS that limits the memory

remove memory chips?
no, if you just remove two of them the card have only 64 bit databus left

other memory chips?
normal are four memory chips "512K x 32Bit x 4banks" per GPU
the 64MB mod use 1024k x 32Bits x 4Banks so best will be 256k x 32Bits x 4Banks or can i use 512K x 32Bit x 2banks ?
also i cant solder it

Title: Re: VSA-100 16MB mod?
Post by RaverX on 14.01.10 at 22:24:49
I think that Komponent could help you downgrade the card (hardware way), and maybe provide a software mod (BIOS) for that - without the need to change the memory.

But...why would you want to do that ?

Title: Re: VSA-100 16MB mod?
Post by exxe on 15.01.10 at 13:31:33
get a SD memory V5 5000

Title: Re: VSA-100 16MB mod?
Post by razrx on 16.01.10 at 01:45:56

exxe wrote on 15.01.10 at 13:31:33:
get a SD memory V5 5000


that sounds bass ackwards to me....    ::)

The board layouts are noticeably different, not to mention the lack of an AGP4X connector and NFR stickers.  Good luck with your gimped Frankenstein card.

Title: Re: VSA-100 16MB mod?
Post by Thandor on 16.01.10 at 01:54:46

razrx wrote on 16.01.10 at 01:45:56:

exxe wrote on 15.01.10 at 13:31:33:
get a SD memory V5 5000


that sounds bass ackwards to me....    ::)

The board layouts are noticeably different, not to mention the lack of an AGP4X connector and NFR stickers.  Good luck with your gimped Frankenstein card.
I think exxe just wants a card that works like the V5 5000 ;). Not recreate one card to make it special/expensive or whatsoever. Personally I think it's interesting to have 4MB, 8MB and 16MB Voodoo3's and 16MB, 32MB and 64MB VSA-100's :). Just to see what impact it will have in benchmarks.

Title: Re: VSA-100 16MB mod?
Post by Chosen_One on 18.01.10 at 19:26:16
He just wants to bench a regular Voodoo5 5000 AGP (with SDR-SGRAM) against a modded Voodoo5 5500 AGP (with SDR-SDRAM) with only 32MB VRAM in total in order to see if there are differences in speed.

Title: Re: VSA-100 16MB mod?
Post by exxe on 03.02.10 at 19:32:27
bump

Title: Re: VSA-100 16MB mod?
Post by Komponent on 05.02.10 at 10:32:37
Sorry for the delay in answering to this, but I still am not completely well, so please do not put pressure on me...
If you want a regular 64MB AGP Voodoo5 modded to 32Mb, 16Mb for each VSA100 GPU, all you have to do is to solder two 4.7 kohm resistors on the PCB. Bellow you have in the picture to complete guide to do it yourself:

http://img27.imageshack.us/img27/4457/32mb2x16mbvoodo5diy.th.jpg

The proof that it is the working modd:

http://img229.imageshack.us/img229/3889/32mbv5boot.th.jpg

http://img524.imageshack.us/img524/672/16mb3dmark.th.jpg

The modded card (sorry, all I have is the crap camera of my phone):

http://img15.imageshack.us/img15/194/32mbv5card.th.jpg

I hope that this is what you asked for. Have fun modding!

Title: Re: VSA-100 16MB mod?
Post by Tim on 05.02.10 at 10:37:00
That's brilliant Komponent! Thanks for posting.

Looks easy enough!

Title: Re: VSA-100 16MB mod?
Post by exxe on 05.02.10 at 17:03:14
THX

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.