3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl 3dfx Section >> 3dfx Drivers >> 3dfx Velocity / Voodoo 3 Driver http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1284589366 Message started by Aquanox on 16.09.10 at 00:22:46

Title: 3dfx Velocity / Voodoo 3 Driver
Post by Aquanox on 16.09.10 at 00:22:46

hello 3dfx user!

i don't know if you know about that.
an user of http://www.winhistory-forum.net have found an 2D driver for windows 3.1 / windows for workgroups 3.11!
I was totally confused about that, because this is an very rare found.
i have start an new thread about this driver and an german discussion about that in >
http://www.winhistory-forum.net/ms-dos-windows-1-x-3-x-9x-und-me/6578-support-win3-1x-treiber-fuer-3dfx-velocity-voodoo-3-a.html
now in this thread is the Upload/Download from this Driver too.
you can use this driver for your 3dfx Archive as "win3.1x driver.
I have write an post in the en board of 3dfxzone.it with available download link from this driver too.

aquanox

Title: Re: 3dfx Velocity / Voodoo 3 Driver
Post by FalconFly on 16.09.10 at 03:26:02

Sounds cool, thanks for the hint :)

Title: 3dfx Velocity / Voodoo 3 Driver for Win3.1x
Post by Aquanox on 17.09.10 at 02:31:52

Now i have created an new zip-File included with utilities, they can make fixed the 60hz driver issue with crt displays. ;)
http://up.myblackbox.net/3dfx_Voodoo3_Win31x.zip

Title: Re: 3dfx Velocity / Voodoo 3 Driver
Post by FalconFly on 25.09.10 at 13:10:26

Okidok, Driver is online :)

Title: Re: 3dfx Velocity / Voodoo 3 Driver
Post by exxe on 25.09.10 at 21:37:23

rare found?
its on the velocity 100 driver CD. (only v3 card how have noticed win 3.11 drivers on the box )

hmmm
Aquanox1968 on the other forum says he have the driver from dr. zeissler, and he get it from me

Title: Re: 3dfx Velocity / Voodoo 3 Driver
Post by FalconFly on 26.09.10 at 16:39:42

Why do you always care for these pesky little details?

Please sort that out with Aquanox if it matters.