Hi

I Have this motherboard, it comes out A Packard bell computer. I am not 100% sure the motherboard works, because I guess this motherboard has leak condensators? See See the picture for this

But as you can see it complete with an usb-cable and a tv-out bracket for the voodoo
http://members.home.nl/stefanpittie/AA/aa/Afbeelding%20009.jpg

http://members.home.nl/stefanpittie/AA/aa/Afbeelding%20011.jpg

I have this Board too. It definitely has Elcos from a brand that it is known that they produced leaky ones. My board was running fine with a PIII-450 without any crashes. Then i decided to push it a bit with a Tualeron 1.3Ghz. It is able to provide correct 1.5Vcore but the System never was really stable so i replaced all caps that i thought of were in the voltage regulation circuit. But i had no succes. The board still runs but it is not stable with the Tualeron. Maybe the voltage regulators are not able to do more than the PIII-450.

You should also replace those caps. My ones weren´t leaky at the point i replaced them. By time your board will get unstable and can get serious damage!

Greetings
Tobi

the name of the board: MSI MS-6168

yes it works without problems with the 1.3 Msi award bios! you can adjust fsb in bios...

Hey Thannks for all your advise.
But The point is, I don't use this board anymore.

So I though maybe some wants to have it. Because there is a big voodoo fan community. So I though maybe one of you is interessed and want to buy it!