3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> My VoodooMAC 5 broke! Arhhhh!!! :( http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1093816732 Message started by Maverick-DBZ- on 29.08.04 at 23:58:52 |
Title: My VoodooMAC 5 broke! Arhhhh!!! :( Post by Maverick-DBZ- on 29.08.04 at 23:58:52
Can it be fixed? It looks to be a simple job, but I have no idea where to go to get it fixed! ???
|
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by FalconFly on 30.08.04 at 00:04:15
*ugh*
Did it "pop" off itself (overheat or other End-of-Life of that component), or did you shear it off ? (can't tell, since the bottom of the component looks a tad burned, or could be remains of a glue?) If the component is still good, a skilled person with a suitable soldering Tool might get it fixed. Either find someone you know who has the right tools, or try to find an old TV/Electronics repair shop; those usually can fix something like that as well. (always assuming there is no special soldering technique required to do it) |
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by paulpsomiadis on 30.08.04 at 00:16:55
Me to the rescue! ;D
If the capacitor is the ONLY broken component on the board - it looks like I could fix it quite easily! ;) From the pictures it seems as though you've actually PULLED the solder pads away from the board as well! :o Usually this would mean the card would be F.U.B.A.R. (F***ED - UP - BEYOND - ALL - REPAIR). ::) :P However, the LUCKY thing is that the original solder pads for the capacitor are connected to some VERY large tracks on the PCB - this would mean it's relatively easy for someone who knows what they're doing to repair! :D Of course, if you actually wanted me to do the job you'd have to post the card and the 'loose' component to me for rework... ::) It's up to you, either that or find somewhere local... ;) Nuff said! 8) P.S. @Falcon - the 'residue' on the component is glue! ;) |
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by Maverick-DBZ- on 30.08.04 at 00:55:34
I pulled the capacitor out when I pulled the card out of my motherboard! :o Man I totally freaked out when I found out what I just done! ???
I'll send you the card paulpsomiadis, I'm pretty sure you can fix it. The capacitor still has it's metal pins on so I think it's just a quick solder job. Do your live in the US paulpsomiadis? |
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by paulpsomiadis on 31.08.04 at 05:41:41
Err...you just asked the WORST question! :o
And unfortunately, it answers itself! :( I live in the U.K. ::) :P Which unfortunately means that postage for ANY parcel from the U.S.A. to U.K. will cost a LOT of cash! :o Just on a general note to any other forum members who live in the U.S.A. - if you can help @Maverick-DBZ- in the same way that I can (namely by fixing his V5500MAC)...then please reply in this thread... ;) If not, then I'll P.M. @Maverick-DBZ- with my address as a last resort... ::) I'm confident that fixing the card is pretty easy, but I'd want to save us BOTH the postage costs - as I'm a student and don't have much cash! :'( I'll STILL do the job if circumstances push us to go in that direction though! ;) |
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by Maverick-DBZ- on 31.08.04 at 05:46:18
No problem paulpsomiadis, I'm sure I can find a local repair shop somewhere in my area.
I had a feeling you lived in the UK but I wanted to confirm it. No real bid deal really it's not your fault you like in the UK. ;) I'll keep everyone posted once the card is fixed. :) |
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by paulpsomiadis on 01.09.04 at 00:19:13
Good luck man! ;)
At least it's fixable... ::) A mate of mine recently had his Radeon X800 BURN OUT on him...thankfully it was under warantee, so he's waiting for a replacement... :P PEACE! 8) |
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by DenisF on 01.09.04 at 00:38:11
Burn? you mean that literally? or did the core just overheat and die?
|
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by paulpsomiadis on 03.09.04 at 23:09:20
@DenisF - a bit of BOTH actually... :o
The core got SO HOT that it MELTED the heatsink off of the card - consequentially the core then melted! :o EEK! :o |
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by @mp_m@n on 07.09.04 at 07:25:48
Maverick-DBZ-, if you can't find a repair shop that can do it, I can pick up the task easily, espeically if you (or someone else) can locate a replacement capacitor. It won't be pretty (no repair to a break like that will), but it will work.
BTW, email me if you do require my services, I would be more than glad to help, but this IP, like all my others, will undoubtedly be blocked as soon as I finish this post. |
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by Maverick-DBZ- on 14.09.04 at 18:06:22
Thanks for the kind offer, but it already got repaired. ;D The capacitor was still good. Thank god. :o
I did it myself, :o Yes I know it was risky but I got some pratice off some other cards. ;) I didn't think it would be so easy. :P edit: why would your ip be banned again? |
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by paulpsomiadis on 14.09.04 at 20:10:18
@amp_man got into an argument with some of the forum members a LONG time ago... ::)
@Falcon and @Patience took a rather dim view of this prolonged arguing - and banned him... :P Plus some other LONG story about posts on another forum... ::) Blah, blah... :P P.S. Glad to hear you fixed your card! ;D (Pictures?) ??? |
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by janskjaer on 15.09.04 at 00:26:29
Close call! Glad you got the card fixed! Would have been more expensive in the long run if you would have had to go out out and buy a replacement! Have you seen how much those puppies are going for lately? ;)
OUCH! :o |
Title: Re: My VoodooMAC 5 broke! Arhhhh!!! :( Post by Maverick-DBZ- on 20.09.04 at 08:10:04
Yeah I've seen them! :o Over $70 on ebay now. Soon they will be back at the $100 range. :P
|
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |