3dfx Archive - card id needed

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › 3dfx Section › Tech Talk › card id needed

(Moderators: gdonovan, NitroX infinity, FalconFly)

‹ Previous Topic | Next Topic ›

Pages: 1

card id needed (Read 224 times)

djlotus

Guest

card id needed
27.11.03 at 23:53:34

I need help figuring out which card i have. I pulled it out of my buddy's HP Pavillion. here's a short description:

pci
4 chips
------looks like it could hold 6 chips
silver heat shield
26 pins on top of card
monitor port only
------opposite side of card that plugs into board
10 black "fins" next to the pins

I need to find the driver for this card. I am using it as a secondary monitor in a studio setup.Any help is appreciated.I did not find it on the spanish guy's site.

IP Logged

paulpsomiadis God Member Offline -=3Dfx still rox!=- Posts: 2011 Newcastle U.K. Gender:	Re: card id needed Reply #1 - 28.11.03 at 00:06:47 Hmm, sounds like you are describing a Voodoo 3... Although your description is a bit vague? Are the 'four chips' RAM? ??? Are they arranged around a 'central large chip' (V3 core)? ??? Can anyone else verify my theory? ??? C'mon people!
Back to top	-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+ IP Logged

FalconFly YaBB Administrator Offline 3dfx Archivist Posts: 2445 5335N 00745E Gender:	Re: card id needed Reply #2 - 28.11.03 at 00:48:33 Hm, without a more detailled sketch or description of the Card, impossible to help. Judging from a quick look-up of HP's Pavillion series, I did not find any clues that would suggest they ever used a 3dfx Card in those Systems. Any imprints or numbers visible on the Chips or the Card itself would be helpful (e.g. its FCC ID Number)
Back to top	WebMaster FalconFly Central 3dfx Archive IP Logged

DJ LOTUS Guest	Re: card id needed Reply #3 - 28.11.03 at 05:29:39 FOUR CHIP LOCATED TO THE UPPER RIGHT OF THE HEAT SHIELD POSITIONED TWO CHIPS SIDE BY SIDE WITH TWO MORE DIRECTLY UNDERNEATH THE OTHER TWO. TWO CHIPS LOCATED DIRECTLY TO THE RIGHT OF THE HEAT SHIELD POSITIONED ONE ON TOP OF THE OTHER. FCC# 210-0382-004 (C)2000 3DFX INTERACTIVE INC.
Back to top	IP Logged

Lecram25

Full Member

Offline

DOUBLE the Processor
DOUBLE the Bandwidth

Posts: 212
Melbourne, FL, USA
Gender: male

Re: card id needed
Reply #4 - 28.11.03 at 05:37:31

lol, beats me? ???

That 4 four-chip thingy sounds like the Voodoo 5 6k 2x2 design, but there were like only 2-3 made, plus they're fake; highly doubt he has a 6k and doesn't know it...

EDIT: ignore what I said...I just read his top post...PCI...

« Last Edit: 28.11.03 at 05:39:52 by Lecram25 »

IP Logged

paulpsomiadis

God Member

Offline

-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male

Re: card id needed
Reply #5 - 28.11.03 at 12:20:25

Like I said before, it sounds like a Voodoo 3 PCI Roll Eyes

Does your card look similar to THIS ???: -

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2768138160&category=27388

...if it does, then it's DEFINATELY a Voodoo 3 PCI. Grin

Answers on an e-card folks! Wink

--REALLY fast edit-- Shocked

Check HERE for info on your card Tongue

: -

http://www.video-drivers.com/drivers/77/77441.htm

Oh and I was correct, it's a Voodoo 3 2000! Cheesy

It's nice to be right! Grin

« Last Edit: 28.11.03 at 12:23:47 by paulpsomiadis »

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+

IP Logged

DJLOTUS Guest	Re: card id needed Reply #6 - 28.11.03 at 12:42:53 HELL YEAH THATS IT! THATNKS SO MUCH GUYS.
Back to top	IP Logged

bearfreeman YaBB Newbies Offline I love YaBB 1G - SP1! Posts: 1	Re: card id needed Reply #7 - 12.12.03 at 19:21:43 That's answered my query too! ) I take it this card can run on a PC ok?
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page