3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> Voodoo Cooling Solutions http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1136314493 Message started by NitroX infinity on 03.01.06 at 19:54:53 |
Title: Voodoo Cooling Solutions Post by NitroX infinity on 03.01.06 at 19:54:53 |
Title: Re: Voodoo Cooling Solutions Post by Obi-Wan_Kenobi on 03.01.06 at 20:58:28
hehe yeah only the fan is abit cheap, a Zalman CU700 or something would be a better choice hehe.
I'm thinking that they are the same fans used on some Northbridge chips of Mobo's. The I would still prefer 3dfx orginal Voodoo3 3000 cooler nice and quiet lol. |
Title: Re: Voodoo Cooling Solutions Post by perer on 04.01.06 at 11:12:50
Well a Zalman would totally change the look of the card IMHO.
This cooler looks a lot like the Voodoo 3 heatsink. |
Title: Re: Voodoo Cooling Solutions Post by roflkopp on 04.01.06 at 13:51:40 |
Title: Re: Voodoo Cooling Solutions Post by Obi-Wan_Kenobi on 07.01.06 at 02:01:51
@ Gamma 742
Didn't your defect V6K have these Heatsinks? |
Title: Re: Voodoo Cooling Solutions Post by gamma742 on 07.01.06 at 03:59:35 |
Title: Re: Voodoo Cooling Solutions Post by Obi-Wan_Kenobi on 07.01.06 at 04:02:13
@ Gamma 742
GORTIG!!! That's Dutch for Woah!!!! |
Title: Re: Voodoo Cooling Solutions Post by gamma742 on 07.01.06 at 04:43:21
Pft. Looks good but was it enough ???
See my post here, Reply "3" follow the link... http://www.falconfly-central.de/cgi-bin/yabb/YaBB.pl?board=general;action=display;num=1136594960 |
Title: Re: Voodoo Cooling Solutions Post by NitroX infinity on 07.01.06 at 09:28:09
I had Zalman ZMNB32-J's. These would cool the card in idle mode (browsing, typing, etc) but were not nearly sufficient when playing games. I had to attach the original fans to these heatsinks for adequate cooling.
Didn't have an airflow in my case btw. You either need a big-ass heatsink or a smaller heatsink with a fan. |
Title: Re: Voodoo Cooling Solutions Post by NitroX infinity on 11.10.07 at 13:50:17
Zalman has a new cooling solution for northbridges which looks quite good to be honest.
This looks to be a better cooler than Zalman's previous northbridge cooler thus more capable of cooling Avenger and VSA-100 chips. http://www.zalman.co.kr/eng/product/view.asp?idx=200&code=014 |
Title: Re: Voodoo Cooling Solutions Post by outlaw on 11.10.07 at 17:06:06
Zalman's "flower" like passive product are meant to be operated vertically in order to spread the heat and not flat (in case of a "on vga core" mount position).
|
Title: Re: Voodoo Cooling Solutions Post by NitroX infinity on 11.10.07 at 17:40:56
With a good airflow they can be mounted horizontal too.
|
Title: Re: Voodoo Cooling Solutions Post by OutOfRange on 12.10.07 at 21:19:50
there's no other solution than two 3000 coolers on a 5500 :-*
http://www.3dfx.ch/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=26620&g2_serialNumber=1 and in green they're looking pretty good (picture is bad sry) ;D |
Title: Re: Voodoo Cooling Solutions Post by gdonovan on 12.10.07 at 21:28:32
That looks really cool!
|
Title: Re: Voodoo Cooling Solutions Post by OutOfRange on 12.10.07 at 21:34:31
only problem is, that you need an additional fan somewhere around the sinks :P :(
|
Title: Re: Voodoo Cooling Solutions Post by gdonovan on 12.10.07 at 22:22:56 wrote on 12.10.07 at 21:34:31:
Depends, I built a silent PC with the same setup but the board was downclocked to 143 mhz via custom bios. |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |