3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> Witch card is that ?
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1198680464

Message started by m14radu on 26.12.07 at 15:47:44

Title: Witch card is that ?
Post by m14radu on 26.12.07 at 15:47:44
I found this picture...



http://www.iq-hardware.de/news/userimages/big.jpg

Notice the clock generator in the middle of the picture...

Br.
Radu.

Title: Re: Witch card is that ?
Post by NitroX infinity on 26.12.07 at 15:58:05
Picture is not working here.

Title: Re: Witch card is that ?
Post by SAT+KABEL on 26.12.07 at 16:06:41
It's the Voodoo FM card.


See

http://www.tdfx.de/pic/voodoo_tvfm_01.JPG

Title: Re: Witch card is that ?
Post by m14radu on 26.12.07 at 16:14:05
Ok, thanks a lot.
;)

Title: Re: Witch card is that ?
Post by max1024 on 01.03.08 at 23:49:12
Help me to identify my cards:
One - Eagles rush [PCI] - 6MB EDO-RAM ???
http://img407.imageshack.us/img407/3848/rushbigfr9.th.jpg
http://img90.imageshack.us/img90/1059/rushbackki2.th.jpg

Two - Unknown Voodoo2 8Mb *Super* sticker ???
http://img84.imageshack.us/img84/1484/v28superbza1.th.jpg
http://img100.imageshack.us/img100/4103/v28mbsuper1cn3.th.jpg
Strange cards  ;)

Title: Re: Witch card is that ?
Post by OutOfRange on 02.03.08 at 00:12:59
The one on top is a Macronix Rush, afaik it has 6 MB on the 3dfx site  ;D

Whats written on the V2 on the right side of the right Bruce chip ?

Title: Re: Witch card is that ?
Post by max1024 on 02.03.08 at 11:39:47
OutOfRange
At first I think that it is Procomp G108, Macronix is is chip I need model & manufacturer. When I visit exxe gallery and see on eagles rush I think? that it is my card, but not sure completely. Look at this:
http://www.tdfx.de/eng/eagles_rush.shtml - eagles rush
http://www.tdfx.de/eng/g108.shtml - Procomp G108.
At the back side of the card in the top left written : HL1-VO  9747  94V-0


Quote:
Whats written on the V2 on the right side of the right Bruce chip ?

Im not understand your question, what is Bruce chip ?
At the back of the cars there are some inscriptions: 94V-0   9825A & 600-0027-02-B strange card  :-?

Title: Re: Witch card is that ?
Post by Eye-Q on 02.03.08 at 12:11:49

max1024 wrote on 02.03.08 at 11:39:47:
OutOfRange
Quote:
Whats written on the V2 on the right side of the right Bruce chip ?

Im not understand your question, what is Bruce chip ?

The two top 3Dfx-chips (Texture Mapping Units) have "BE" written on it, that stands for Bruce, the bottom 3Dfx-chip has "CK" on it, that's short for Chuck. I think that are two of the engineer's names who worked on the Voodoo 2-chipset.

max1024 wrote on 02.03.08 at 11:39:47:
At the back of the cars there are some inscriptions: 94V-0   9825A & 600-0027-02-B strange card  :-?

9825A should be the production date (25th week of 1998), the other code is an identification number for the card but I didn't find out for which card that stands.

Title: Re: Witch card is that ?
Post by max1024 on 02.03.08 at 12:35:55
Ok, there is photo of BE chips, but what  can it helps ?
http://img264.imageshack.us/img264/4822/berr4.th.jpg

Title: Re: Witch card is that ?
Post by NitroX infinity on 26.07.08 at 00:10:01
Bit of a late reply but hopefully usefull.

The second card appears to be from Supergrace.
Supergrace was a reseller, not a manufacturer so I can't help you on which company actually build the card.

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.