3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> Why not upgrade a V3's memory?
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1162035354

Message started by NitroX infinity on 28.10.06 at 13:35:54

Title: Why not upgrade a V3's memory?
Post by NitroX infinity on 28.10.06 at 13:35:54
We're talking a lot about upgrading the memory on Voodoo 4/5 cards. But what about Voodoo 3's?

The amount of V3's that can reach 200MHz and beyond is far greater than the amount of V4/5's. So why not put faster memory on a V3?

I know, a V3 is limited to 16MB, but it performs almost the same as a V4 in 16bit mode. So wouldn't it make more sense to upgrade a V3's memory?

Title: Re: Why not upgrade a V3's memory?
Post by Obi-Wan_Kenobi on 28.10.06 at 13:38:11
with faster ns ram you mean?

is an idea, but 16MB is still the limitation hehe the DGRAM cards do have space for extra ram modules, like the 1000 AGP 16MB and Velocity 200 have them filled.

might be a nice idea for an overclockings party :)

Title: Re: Why not upgrade a V3's memory?
Post by agrelaphon on 28.10.06 at 21:42:52
Where would you find 200MHz 2MB/chip RAM? It must be extreamly rear. Most V3s have 183MHz (5.5nsec) Ram  :P anyway. Gain would be marginal

Title: Re: Why not upgrade a V3's memory?
Post by Obi-Wan_Kenobi on 29.10.06 at 00:36:42
there were some Power Color Voodoo3 3000 AGP's with 5ns SDRAM, I had one it OC'ed flawlessly to core/mem 230Mhz :) chickened out to go further though :)

Title: Re: Why not upgrade a V3's memory?
Post by agrelaphon on 29.10.06 at 12:12:30
Wow, those must have been some high grade avenger chips!
Anyway, no point in taking apart a powercolour i guess  :-*

Title: Re: Why not upgrade a V3's memory?
Post by Obi-Wan_Kenobi on 29.10.06 at 17:17:05
heheh nah not worth it really :) but yeah I sold that card to Habbs alont time ago

Title: Re: Why not upgrade a V3's memory?
Post by MrFossey on 29.10.06 at 19:28:41

wrote on 28.10.06 at 21:42:52:
Where would you find 200MHz 2MB/chip RAM?

Maybe it's possible to install fast and larger RAM. In case it works the card will only detect 16MB (instead of al the RAM installed).
Just like installing 32Mbit chips with 8 datatraces on an Intel 440BX, it will only use 50% of the installed RAM :)

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.