3dfx Archive - PCI-to-PCI Bridge PLX PCI6152-CC66BC F

Loeschzwerg

Senior Member

Offline

AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male

PCI-to-PCI Bridge PLX PCI6152-CC66BC F
22.05.12 at 18:27:57

Hi everyone,

today a package arrived I've been waiting for quite some time. The shipment comes from Taiwan and contains 10 PCI-to-PCI bridges

Those are PCI6152-CC66BC bridges from PLX and are identical to the HiNT HB1-SE66. Every Voodoo 5 6000 owner should know these Wink

HiNT Copr. was taken over by PLX Technology in the year 2003. The PLX PCI6152-CC66BC is a revised version of the HB1-SE66 and 1 to 1 compatible according to the spec sheet.

A few pics:
-> The packaging
-> The charge carrier with 10 bridges
-> The bridge itself

So I now own a few spare bridges for Voodoo 5 6000 beginning with the rev 2600.

Regards,
Löschzwerg

Back to top

« Last Edit: 22.05.12 at 18:28:22 by Loeschzwerg »

IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F
Reply #1 - 22.05.12 at 19:17:44

Loeschzwerg wrote on 22.05.12 at 18:27:57:

Hi everyone,

today a package arrived I've been waiting for quite some time. The shipment comes from Taiwan and contains 10 PCI-to-PCI bridges

Those are PCI6152-CC66BC bridges from PLX and are identical to the HiNT HB1-SE66. Every Voodoo 5 6000 owner should know these Wink

HiNT Copr. was taken over by PLX Technology in the year 2003. The PLX PCI6152-CC66BC is a revised version of the HB1-SE66 and 1 to 1 compatible according to the spec sheet.

A few pics:
-> The packaging
-> The charge carrier with 10 bridges
-> The bridge itself

So I now own a few spare bridges for Voodoo 5 6000 beginning with the rev 2600.

Regards,
Löschzwerg

Hi Loeschzwerg,

What do you want to do with these chips? repair dead hint chip on rev.2600A2?

Back to top

« Last Edit: 22.05.12 at 19:20:01 by trevormacro »

IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F Reply #2 - 22.05.12 at 19:27:56 I bought them because a few weeks ago PLX did officially stop to take orderings, so I thought it would be good to have a few for spare "Beginning with rev 2600" I meant from rev 2600 to 3900.
Back to top	IP Logged

goriath God Member Offline Ruggedized Retro Gamer Posts: 599 Italy/Slovenija Gender:	Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F Reply #3 - 22.05.12 at 19:34:37 Nice catch. These could turn out handy in the next future
Back to top	OLD SCHOOL: Because it was done right the first time IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F Reply #4 - 22.05.12 at 19:34:57 Loeschzwerg wrote on 22.05.12 at 19:27:56: I bought them because a few weeks ago PLX did officially stop to take orderings, so I thought it would be good to have a few for spare "Beginning with rev 2600" I meant from rev 2600 to 3900. Ok, thanks
Back to top	IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F Reply #5 - 24.05.12 at 02:49:14 @Loeschzwerg: Can you repair the V5k6 rev.3700A of GrandAdmiralThrawn?
Back to top	IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F Reply #6 - 24.05.12 at 07:24:56 If the bridge is the broken part, yes.
Back to top	IP Logged

Loeschzwerg

Senior Member

Offline

AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male

Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F
Reply #7 - 18.06.12 at 20:03:09

Some pictures of Chosen's Voodoo 5 6000 Rev 3700. The card was dead and is now running with a new PLX bridge

The number written on the power management chip U509 is 38.

CR3 and 4 seem to have been replaced and the PCB was cut. This cut is fixed via a solder tin bridge.

The card is also running flawlessly with AA, no PCI rework is needed, the card runs without it.

Back to top

IP Logged

rottentreats God Member Offline 3dfx > Reality Posts: 616 Minnesota [USA] Gender:	Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F Reply #8 - 19.06.12 at 17:12:04 Amazing work! I always love to see another goddess come back to life. Keep up the great work!
Back to top	IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F Reply #9 - 19.06.12 at 17:15:02 Thanks Maybe other cards will follow soon
Back to top	IP Logged

Loeschzwerg

Senior Member

Offline

AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male

Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F
Reply #10 - 22.06.12 at 13:58:38

Bad news, the card remains dead after all Sad

The card works for a day and then stops working. Voltage supply is ok, memory of master VSA100 is also ok.

I re-soldered the bridge several times but it always behaves the same way.

At the moment I don't get a response anymore... so I think after all that reworks something else got damaged Sad

Sad for Chosen, sad for the card Embarrassed

Back to top

IP Logged

goriath

God Member

Offline

Ruggedized Retro Gamer

Posts: 599
Italy/Slovenija
Gender: male

Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F
Reply #11 - 22.06.12 at 15:01:23

Loeschzwerg wrote on 22.06.12 at 13:58:38:

Bad news, the card remains dead after all Sad

The card works for a day and then stops working. Voltage supply is ok, memory of master VSA100 is also ok.

I re-soldered the bridge several times but it always behaves the same way.

At the moment I don't get a response anymore... so I think after all that reworks something else got damaged Sad

Sad for Chosen, sad for the card Embarrassed

Oh damn...

That's really make me sad, so clooose.

But, let's make it more clear; reading better what you have written, I understand it worked for few hours, then it stopped to work, right?

...And at the time you was writing this post the card has actually stopped completely to work, right?

Sad

Back to top

OLD SCHOOL: Because it was done right the first time

IP Logged

Loeschzwerg

Senior Member

Offline

AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male

Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F
Reply #12 - 22.06.12 at 15:21:43

Yes, I don't get any feedback from the card. "no VGA beep" and no bridge is shown with PCI view.

The problem is also that the solder pads have been though a lot now and two pads have started to lift. I have fear that, if I unsolder the bridge again, the card will get damaged even more Undecided

So I can't do anything to bring the card back.

Back to top

IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F
Reply #13 - 22.06.12 at 16:08:43

Loeschzwerg wrote on 22.06.12 at 15:21:43:

Yes, I don't get any feedback from the card. "no VGA beep" and no bridge is shown with PCI view.

The problem is also that the solder pads have been though a lot now and two pads have started to lift. I have fear that, if I unsolder the bridge again, the card will get damaged even more Undecided

So I can't do anything to bring the card back.

3 solutions:

First --> Hint chip is bad soldered:

Do the work with a pro. company and make X-Ray after work to see if all traces on V5k6 card is very good soldered with all traces on rear hint chip.

Second --> Traces on the card can be damaged (it's not possible to sold hint chip on the card):

They need to check traces and know where each ball from chip Hint must be soldered. It's a chinese work!

Third --> the PLX bridge is not good for the card:

You need to have the exact model which is already present on the card.

Regards,
Trevor

Back to top

« Last Edit: 22.06.12 at 16:17:07 by trevormacro »

IP Logged

goriath

God Member

Offline

Ruggedized Retro Gamer

Posts: 599
Italy/Slovenija
Gender: male

Re: PCI-to-PCI Bridge PLX PCI6152-CC66BC F
Reply #14 - 22.06.12 at 18:44:48

Nope.

He's saying the pads inside the bridge area are starting to lift. If they completely come off from the PCB, the death of the card is official.

Actually it depends. If the pads which are lifting are on the edge, they are linked to visibile traces upon the PCB surface around the bridge, in this case you can do a rework, it's not easy, but you can try (but I think that Loeschzwerg have already done the math). Otherwise if we are speaking about one of those inside the area (beneath the bridge), those are linked somewhere throught all the card's layers; in this case, there is no chinese that can do something.

EDIT: The compatibility of the PLX bridge is out of question IMHO. I read the datasheet too and the PCI6152-CC66BC fully complies to the original Hint bridge specs. These bridges were being used on late AAlchemy boards too.

Back to top

« Last Edit: 22.06.12 at 18:57:16 by goriath »

OLD SCHOOL: Because it was done right the first time

IP Logged

	Welcome, Guest. Please Login