3dfx Archive - Re: Empty connector on Maxigamer 3D

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › 3dfx Section › Tech Talk › Re: Empty connector on Maxigamer 3D

(Moderators: FalconFly, gdonovan, NitroX infinity)

‹ Previous Topic | Next Topic ›

Pages: 1

Re: Empty connector on Maxigamer 3D (Read 162 times)

NitroX infinity YaBB Moderator Offline Posts: 1936 The Netherlands Gender:	Re: Empty connector on Maxigamer 3D 25.05.05 at 12:02:52 Perhaps 'would-be' connections for a 2D daughterboard?
Back to top	My Blog IP Logged

Eye-Q God Member Offline Posts: 522 Germany Gender:	Re: Empty connector on Maxigamer 3D Reply #1 - 25.05.05 at 13:08:01 There is another empty connector beneath the RAMDAC, it's exactly opposite to the addressed empty connector, maybe they belong together and they were intended for a 2D-Daughterboard as NitroX infinity stated.
Back to top	IP Logged

paulpsomiadis God Member Offline -=3Dfx still rox!=- Posts: 2011 Newcastle U.K. Gender:	Re: Empty connector on Maxigamer 3D Reply #2 - 25.05.05 at 17:24:44 Or maybe for a TV-OUT module like on the Voodoo Rush... ???
Back to top	-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+ IP Logged

gamma742

God Member

Offline

3Dfx Gamer

Posts: 1668
San Diego, CA USA
Gender: male

Re: Empty connector on Maxigamer 3D
Reply #3 - 26.05.05 at 03:46:49

Quote:

Direct under the '45 million pixels/sec' there's an empty connector. It has 2x5 pins.
I also see some traces going somewhere to the D-SUB ?

Right under it (above the left side of the PCI connector) I see one too. Also 2x5 pins.

You have all heard of SwapLock/SyncLock.?.?

If not, check out the connectors on my V1 Q3D 100SB or my V2 Q3D 200SBi in my signature file below

Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best...

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page