3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl 3dfx Section >> Tech Talk >> Monster Fusion AGP Voltage spec req. http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1160210166 Message started by msimmo on 07.10.06 at 10:36:06

Title: Monster Fusion AGP Voltage spec req.
Post by msimmo on 07.10.06 at 10:36:06

Hi

I have a Diamond Monster Fusion AGP card, which is working fine. I would like to use this on another M/B which states that any AGP card fitted must not be 3.3 volts. I can find no info on what the voltage is for the Fusion card, can someone help.

Thanks

Title: Re: Monster Fusion AGP Voltage spec req.
Post by gdonovan on 07.10.06 at 13:05:02

Banshee is very much a 3.3 volt board.

Title: Re: Monster Fusion AGP Voltage spec req.
Post by msimmo on 07.10.06 at 13:41:24

Thanks for that, it saved a costly mistake from occuring.