Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
[S] Daytona 4200 16 MB DDR (Read 141 times)
OutOfRange
Senior Member
****
Offline



Posts: 348
Switzerland
Gender: male
[S] Daytona 4200 16 MB DDR
14.06.09 at 12:01:45
 
Auf Grund diverser Anfragen und da bei mir das 3dfx Fieber im Moment ein wenig hinter andern Hobbies zurückbleibt, verkaufe ich nachfolgende Karte:

(Sry for my poor english) Due tue some querys I got on that item and the fact that actual other hobbies are more primary than the 3dfx one, I'm going to sell the following card:

Daytona 4200 16 MB DDR PCI, PCB Date 4600, PCB: 210-0424-001-A1

...

...

Ich konnte die Karte bisher nie zum laufen bringen, hab allerdings nur zweimal ein wenig Zeit investiert. Sie wird als "unknown Multimedia Device" erkannt und zeigt kein Bild, was beim Booten ohne andere Grafikkarte zum "no VGA" Postbeep führte. Es lassen sich unter Windows auch keine mir bekannten, kompatiblen Treiber installieren. Die Karte weisst bis auf ein paar oberflächliche Kratzer auf der Rückseite keine Beschädigungen auf.

I was never able to set up the card properly, but have to say that I never spent much time on that issue. She's reported as an "unknown Multimedia Device" on startup but doesn't show a picture. If you start the system without a proper Video adapter there's als the "no VGA" Postbeep. There's neither the possibility to install any as working known drivers under Windows. The card itself only has some small scratches on the surface on the backside but no other damages to report.

Die Auktion endet am kommenden Sonntag 21.Juni 22:00 oder 5 Minuten nach dem letzten Gebot. Die Karte startet mit einem MP von 250€. Der Preis beinhaltet keine Versandkosten, Versand erfolgt aus der Schweiz ! Überweisung der Summe per IBAN oder Paypal.

The Auction ends on the upcoming Sunday 21.June 22:00 (CET, which is GMT+2.00) or 5 Minutes after the last bid. The auction starts at 250€. Note: The Price does not include the delivery costs, shipping is from Switzerland ! Payment has to be done over IBAN or Paypal.


Viel Spass, have fun Smiley

Aktueller Preis, actual price: 250 €


Läuft auch noch im VA Board, also listed on the VA Board
Back to top
« Last Edit: 14.06.09 at 14:00:09 by OutOfRange »  
WWW  
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: [S] Daytona 4200 16 MB DDR
Reply #1 - 14.06.09 at 13:46:09
 
OutOfRange wrote on 14.06.09 at 12:01:45:
I was never able to set up the card properly, but have to say that I never spent much time on that issue. She's reported as an "unknown Multimedia Device" on startup but doesn't show a picture. If you start the system without a proper Video adapter there's als the "no VGA" Postbeep. There's neither the possibility to install any as working known drivers under Windows.


That revision was used on IBM servers running Unix with no provision for intel/dos/ms that I'm aware of.

I was able to get mine working under windows but the board is very, very picky about hardware platform and I could only get it to function on one motherboard out of eight. An old TX chipset Pentium 200.

I hope this is some help, others have been able to run it on other motherboards too (which I did not have for testing)

Gary
Back to top
 

Rampage is alive!
 
IP Logged
 
OutOfRange
Senior Member
****
Offline



Posts: 348
Switzerland
Gender: male
Re: [S] Daytona 4200 16 MB DDR
Reply #2 - 14.06.09 at 13:48:08
 
Thanks very much for the informations !

I tested it only on an Epox KT333 based board and an ASUS PIII one (don't remember the model).
Back to top
« Last Edit: 14.06.09 at 13:48:26 by OutOfRange »  
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print