I'm setting up a computer for my nephew put together from stuff I had lying around The specs are

Asus A7V-133C Motherboard
AMD Athlon 1200MHz (Overclocked at 1333MHz)
128Meg PC133 RAM (May increase to 256 - 384)
Creative Vibra128 Sound Card
and most importantly Voodoo3 3000 Video Card
Oh and running Windows98SE and DirectX9.0b

I have loaded the AmigaMerlin 2.9 drivers (which seem fine, unless someone can suggest better)
I have loaded MiniGL 1.49 drivers (Is there something better around than these?)

I have also installed V.Control 1.81b (Koolsmoky) so that I can overclock/tweak the voodoo3.

My main problem is that there are so many options, both under hardware and environmental, that I don't know what the best settings would be. I'm not after raw performance, I would prefer a balance between performance and visual quality.

Hope someone can help or point me to a site / tutorial that can answer my questions.

FalconFly great site by the way

Thanks Phoenix

I didn't notice the preset box I'll give it a shot when I get home tonight

Thanks Fedaykin

I benchmark between each change to check for improvement and stability. So I'll keep an eye on what affect that option has.

Well, I would leave the settings alone. Especially Palette Snoop : leave it off !

You could try to set Max AGP commands to 8, but be aware of stability issues.

Quote:


Huh mine is 32 is that good. I never touched the settings btw.

EP