3dfx Archive - 3dfx Voodoo5 6000 Peltier Watercooling 2nd

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #60 - 20.02.13 at 10:37:12 Loeschzwerg wrote on 19.02.13 at 19:39:46: You're welcome At least the card didn't get damaged on technical side. What is the best material to isolate the card against the freeze on all blanks smd parts? This one or not? http://www.cultura.com/gomme-mie-de-pain-grise,2862282.prd
Back to top	« Last Edit: 20.02.13 at 10:41:17 by trevormacro » IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #61 - 20.02.13 at 11:06:28 Yes, you can use it This Knetgummi Eraser is very often used from overclockers (LN2 OC).
Back to top	IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #62 - 20.02.13 at 13:34:08 Loeschzwerg wrote on 20.02.13 at 11:06:28: Yes, you can use it This Knetgummi Eraser is very often used from overclockers (LN2 OC). How to convert it from powder to gum? How to use it? Thanks.
Back to top	IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #63 - 20.02.13 at 18:35:27 It's no powder, it's already gum. You can split it in little parts and put it back together how you like it. Take a look at the pictures here: http://www.hardwareluxx.de/community/f138/how-richtig-isolieren-benchbros-612785... The same kind of eraser is used here.
Back to top	IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #64 - 20.02.13 at 19:17:52

Loeschzwerg wrote on 20.02.13 at 18:35:27:

It's no powder, it's already gum.

You can split it in little parts and put it back together how you like it.

Take a look at the pictures here:
http://www.hardwareluxx.de/community/f138/how-richtig-isolieren-benchbros-612785...

The same kind of eraser is used here.

I just have them:

Is it good? no salt on these gums?

Back to top

« Last Edit: 20.02.13 at 19:59:55 by trevormacro »

IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #65 - 22.02.13 at 16:06:47 Hi, The gum is set on the card. Is it enough? With my delta fans I will not reach under 0° on TEC so no freeze no?
Back to top	« Last Edit: 22.02.13 at 16:08:06 by trevormacro » IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #66 - 28.02.13 at 16:51:58

First TEST with same system of my watercooling cards.

3DMark01se and Quake3 Freeze @166MHz in the first 5s.

The Watertemp 50°C is to high. (measured with IR lasergun)

The Tecs can be cool -22°C without heat. Better is 30°C watetertemp. But I need more radiatorsurfaces. 360mm radiotor is not enough big to cool well the water.
I have a thermalpower about 480W (400W for the tec cooler and 80 max in charge for the V5k6).
The 360mm Radiator is recommend about 200-300W for good watertemperatures. Better is, I get one more radiotor or much better 2 more. Or with a chiller I would have any better watertemperatures. May be below 20°C.
I let you know.

Any helps?

Back to top

IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #67 - 28.02.13 at 18:09:04 My hint: Disconnect the peltier elements on the backside of the card, you won't need them anyway and it will save a lot of needed cooling power (radiator). I bet at the moment the temperatures are much more worse than with default fans xD
Back to top	IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #68 - 04.03.13 at 18:58:03 I have baught this waterchiller. Aquatuning recommend this one. http://www.aquatuning.de/product_info.php/info/p2693_Durchlaufk-hler-Hailea-Ultr... I hope I will receive it in good condition with DHL. Anyone have experiences with waterchiller?
Back to top	« Last Edit: 04.03.13 at 18:58:48 by trevormacro » IP Logged

ultima

God Member

Offline

Always searching

Posts: 876
The Netherlands
Gender: male

Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #69 - 04.03.13 at 20:14:49

if you keep this up, you will "need" yer own powerplant to keep your card cool.

You overkill with the Peltier coolers, and because they generate too much heat, you throw in another cooling solution to battle that.....dude, where does it end??

If you keep this up, you will spend more on cooling stuff for the 6000 then the card itself has cost you.

Seeing you like to throw money in an bottomless pit, can I give you my bank account? I can put it to a whole better use then you are doing right now.

Back to top

« Last Edit: 04.03.13 at 20:16:30 by ultima »

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4

IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #70 - 05.03.13 at 10:43:51

ultima wrote on 04.03.13 at 20:14:49:

if you keep this up, you will "need" yer own powerplant to keep your card cool.

You overkill with the Peltier coolers, and because they generate too much heat, you throw in another cooling solution to battle that.....dude, where does it end??

If you keep this up, you will spend more on cooling stuff for the 6000 then the card itself has cost you.

Seeing you like to throw money in an bottomless pit, can I give you my bank account? I can put it to a whole better use then you are doing right now.

How many watts produce one VSA100 on a V5k6 in full charge?
Tec on gpu produce 36 Watts.

History:

On the frontside:

4 tec of 36W for gpus and 3 tec of 18W for sdrams.

144 + 54 = 198Watts

http://img15.hostingpics.net/pics/20780084y3.jpg
http://img15.hostingpics.net/pics/49351671y4.jpg

On the rearside:

3 tec of 18W.

=54Watts

http://img15.hostingpics.net/pics/20350942y6.jpg
http://img15.hostingpics.net/pics/17825149y7.jpg

In all = 252Watts TEC on the card + 100Watts max for the V5k6 = 352Watts

The waterchiller is for 790Watts with max low temperature of 4° C.

Back to top

« Last Edit: 05.03.13 at 10:56:56 by trevormacro »

IP Logged

ultima

God Member

Offline

Always searching

Posts: 876
The Netherlands
Gender: male

Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #71 - 05.03.13 at 11:06:33

so you place a cooling solution on a card, which just barely goes over the agp power specs, which in itself generates over 300W of heat, which u=you are going to battle with a cooler specced for 790W?

the 6000 in total uses somewhere between 50W and 60W, you slap on peltiers for 300W, which then you are going to cool with a 790W specced cooling solution?
Why don't you remove the peltiers and just go for watercooling? much more efficient in this case, you are giving yourself a powerbill that you are not gonna like if you keep this up.

Back to top

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4

IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #72 - 05.03.13 at 11:24:22

ultima wrote on 05.03.13 at 11:06:33:

so you place a cooling solution on a card, which just barely goes over the agp power specs, which in itself generates over 300W of heat, which u=you are going to battle with a cooler specced for 790W?

the 6000 in total uses somewhere between 50W and 60W, you slap on peltiers for 300W, which then you are going to cool with a 790W specced cooling solution?
Why don't you remove the peltiers and just go for watercooling? much more efficient in this case, you are giving yourself a powerbill that you are not gonna like if you keep this up.

These waterblocks are only adaptables with tec.
The waterblock of my tec card does not work without tecs, because I dont have thermal contact.

Back to top

IP Logged

goriath God Member Offline Ruggedized Retro Gamer Posts: 599 Italy/Slovenija Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #73 - 05.03.13 at 15:29:54 ultima wrote on 05.03.13 at 11:06:33: the 6000 in total uses somewhere between 50W and 60W If I remember correct 65W for the v56k, 35W for the v55k.
Back to top	OLD SCHOOL: Because it was done right the first time IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #74 - 05.03.13 at 15:38:14 goriath wrote on 05.03.13 at 15:29:54: ultima wrote on 05.03.13 at 11:06:33: the 6000 in total uses somewhere between 50W and 60W If I remember correct 65W for the v56k, 35W for the v55k. And about the VSA100? how much? in charge.
Back to top	IP Logged

	Welcome, Guest. Please Login