3dfx Archive - v5500 mod

VDX Ex Member	v5500 mod 05.06.03 at 05:38:52 Hey everyone I just finished my v5500 mod, card still alive, ill send in some photo's if falconfly would be nice enough to post em for me tomorrow, anyways the mod looks good, card was running at 180 stock with np so ill try and bring it up alittle just to see if this mod did anything as far as performance, hope everyone is doing well, cheers
Back to top	IP Logged

FalconFly YaBB Administrator Offline 3dfx Archivist Posts: 2445 5335N 00745E Gender:	Re: v5500 mod Reply #1 - 09.06.03 at 18:44:38 Alright, here's the imagery you submitted
Back to top	« Last Edit: 09.06.03 at 20:04:25 by FalconFly » WebMaster FalconFly Central 3dfx Archive IP Logged

VDX

Ex Member

Re: v5500 mod
Reply #2 - 10.06.03 at 01:40:13

Well ty Falconfly for your help getting the photo's up for me Tongue

This is my v5500 modded card, the front side is the same old thing but on the back i have put a non-conductive thermal pad to a aluminum riser which is then artic silver3 glued to the heatsinkfan combo, it thought this my help reduce the rear heat issue and let me get to 200.

Well in benchmarx 4.0 i ran at 201 n/p, but that test is so small, so i went to the 2001se test without a problem all the way to 195, and i was sure 200 would be n/p also but i was wrong, i started getting little light more and more as it went so i shut down.i have one more trick to try on this modded card but only if its the chips that are causing the problem, if its the memory im outta luck, so please if you know what cause the lights to appear let me know, ty ???

Back to top

IP Logged

beta

Ex Member

Re: v5500 mod
Reply #3 - 14.06.03 at 00:31:01

My V5 Mod has reached 198/198Mhz but I've had to remove one of the GPU heatsinks as the thermal epoxy was only making point contact. Embarrassed

Nice looking mod there though.

I've been using old PII/PIII SEC heatsinks sawn down to fit. With a loom consisting of two 12V 8000RPM fans.

Haven't really got any hard data yet. I'll put up some images in the future when it's back in one piece. Cry

I'd thought about coolers for the rear, perhaps ceramics?

Back to top

IP Logged

VDX Ex Member	Re: v5500 mod Reply #4 - 16.06.03 at 04:52:01 ceramic, thats a good idea, who makes a ceramic cooler and how good is it, im thinking of petiers. Patience this card has the 5ns memory on it, thou im not sure if that makes any difference ???
Back to top	IP Logged

VDX Ex Member	Re: v5500 mod Reply #5 - 17.06.03 at 06:24:15 I have 2 v5500 with the 5ns memory, from what i have been told there was 3 different memory from 5ns, 5,5ns and 6ns, im not sure about that though cause i only have the 5ns on these 2 cards
Back to top	IP Logged

Katoo YaBB Newbies Offline I love 3Dfx :-) Posts: 9 Czech republic Gender:	Re: v5500 mod Reply #6 - 17.06.03 at 18:40:01 My friend make voltage mode on my Voodoo 5 5500 AGP Now wait on Epox with KT333 (AGP 2x 3,3v ) I must make water cooling on GPU,becose temperature with voltage mode is very high
Back to top	ASUS P4S533,P4 1,6@2,655 GHz,Voodoo 5 5500 AGP 166@198 MHz,Wd 20 GB 7200.&&SB Live! 1024, IP Logged

Katoo YaBB Newbies Offline I love 3Dfx :-) Posts: 9 Czech republic Gender:	Re: v5500 mod Reply #7 - 17.06.03 at 19:05:58
Back to top	ASUS P4S533,P4 1,6@2,655 GHz,Voodoo 5 5500 AGP 166@198 MHz,Wd 20 GB 7200.&&SB Live! 1024, IP Logged

Katoo YaBB Newbies Offline I love 3Dfx :-) Posts: 9 Czech republic Gender:	Re: v5500 mod Reply #8 - 17.06.03 at 19:09:31
Back to top	ASUS P4S533,P4 1,6@2,655 GHz,Voodoo 5 5500 AGP 166@198 MHz,Wd 20 GB 7200.&&SB Live! 1024, IP Logged

VDX Ex Member	Re: v5500 mod Reply #9 - 18.06.03 at 06:47:33 What does that due?
Back to top	IP Logged

paulpsomiadis God Member Offline -=3Dfx still rox!=- Posts: 2011 Newcastle U.K. Gender:	Re: v5500 mod Reply #10 - 18.06.03 at 21:58:46 Hmm...this seems interesting Katoo! Could you post some CLEARER pictures and some instructions on how this was done! ??? Cheers! 8)
Back to top	-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+ IP Logged

Katoo YaBB Newbies Offline I love 3Dfx :-) Posts: 9 Czech republic Gender:	Re: v5500 mod Reply #11 - 18.06.03 at 22:18:59 first:my english is wery bad,sorry This vcore mode made my freinds Now i wait on new mobo with AGP 3,3V(Epox + KT333 ) I must make better cooling GPU and memory. Katoo
Back to top	ASUS P4S533,P4 1,6@2,655 GHz,Voodoo 5 5500 AGP 166@198 MHz,Wd 20 GB 7200.&&SB Live! 1024, IP Logged

VDX Ex Member	Re: v5500 mod Reply #12 - 19.06.03 at 00:13:50 Someone tell me why it would help to change the voltage please
Back to top	IP Logged

FalconFly

YaBB Administrator

Offline

3dfx Archivist

Posts: 2445
5335N 00745E
Gender: male

Re: v5500 mod
Reply #13 - 19.06.03 at 00:41:29

As far as I know, raising the Voltage gives an edge, when the CPU/GPU/Mem is hitting its limits on standard Voltage.

Advantage :
A few % of gained MHz

Disadvantage :
- increased core Temperature
- decreased lifetime
- highly increased risk of destroying it because of electron migration (at a certain level of Overvoltage, this effect even takes place despite Nitrogen cooling, and cannot be controlled)

Back to top

WebMaster FalconFly Central 3dfx Archive

IP Logged

VDX Ex Member	Re: v5500 mod Reply #14 - 19.06.03 at 06:07:57 ah, ty falconfly
Back to top	IP Logged

	Welcome, Guest. Please Login