3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> Voodoo3/4/5 bundled with Voodoo1/2? http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1065099477 Message started by Micha on 02.10.03 at 14:57:57 |
Title: Voodoo3/4/5 bundled with Voodoo1/2? Post by Micha on 02.10.03 at 14:57:57
I didn't tried it yet, so here's my question:
is it possible to run a primary voodoo (3, 4, 5, Banshee etc.) together with a voodoo1/2 card? Well, i think there might be some driver problems.. |
Title: Re: Voodoo3/4/5 bundled with Voodoo1/2? Post by Micha on 05.10.03 at 19:22:27
Yes, I know...this combination is useless, just a try
|
Title: Re: Voodoo3/4/5 bundled with Voodoo1/2? Post by Boiu_Andrei on 07.10.03 at 09:28:04
Can't run a Banshee or a Voodoo3 or other cards in conjuntion with a Voodoo1/2 card, simply because you wouldn't even have a posibility to connect the loopback cable between the main gfx and the Voodoo1/2.
Also, it is likely that you will gain no increased performance on the Voodoo1/2 output, and zero on the Voodoo5. Of course this would be true if the combination V1/2 with V4/5 could be possible... |
Title: Re: Voodoo3/4/5 bundled with Voodoo1/2? Post by Micha on 08.10.03 at 14:03:19
@ Boiu_Andrei:
i thought of voodoo3/4/5 as main gfx ;) @ patience: thanks...well, no need to install such a system, cause i'm running a voodoo5 ;D was just of interest for me...maybe my brother (he's running a kyro 1 with 2 voodoo2's) will consider. what about running a voodoo banshee/3/4/5 for PCI as second card together with a Voodoo banshee/3/4/5 for AGP? would be interesting for a multi-monitor system.. |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |