3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl 3dfx Section >> Tech Talk >> Re: Empty connector on Maxigamer 3D http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1116964674 Message started by NitroX infinity on 25.05.05 at 12:02:52

Title: Re: Empty connector on Maxigamer 3D
Post by NitroX infinity on 25.05.05 at 12:02:52

Perhaps 'would-be' connections for a 2D daughterboard?

Title: Re: Empty connector on Maxigamer 3D
Post by Eye-Q on 25.05.05 at 13:08:01

There is another empty connector beneath the RAMDAC, it's exactly opposite to the addressed empty connector, maybe they belong together and they were intended for a 2D-Daughterboard as NitroX infinity stated.

Title: Re: Empty connector on Maxigamer 3D
Post by paulpsomiadis on 25.05.05 at 17:24:44

Or maybe for a TV-OUT module like on the Voodoo Rush... ???

Title: Re: Empty connector on Maxigamer 3D
Post by gamma742 on 26.05.05 at 03:46:49

Quote:

Direct under the '45 million pixels/sec' there's an empty connector. It has 2x5 pins.
I also see some traces going somewhere to the D-SUB ?

Right under it (above the left side of the PCI connector) I see one too. Also 2x5 pins.

You have all heard of SwapLock/SyncLock.?.?

If not, check out the connectors on my V1 Q3D 100SB or my V2 Q3D 200SBi in my signature file below