3dfx Archive - Voodoo Banshee on WinXp

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › 3dfx Section › Tech Talk › Voodoo Banshee on WinXp

(Moderators: gdonovan, NitroX infinity, FalconFly)

‹ Previous Topic | Next Topic ›

Pages: 1

Voodoo Banshee on WinXp (Read 130 times)

Ryujin Guest	Voodoo Banshee on WinXp 11.05.06 at 17:07:25 Hi. I'm using winXp and my AGP Graphic card broke down. I tried to use my old PCI banshee but now i can get only 4bit color depth. When i select 16bit it crashes my computer. To start windows i must select VGA start. I've tried lots of driver but nothing works. Could you help me out? Thanks
Back to top	IP Logged

Pomidor

Guest

Re: Voodoo Banshee on WinXp
Reply #1 - 11.05.06 at 17:43:04

Are you sure the card itselfs works perfect?
It also might be an incompatibility with your, on the 3Dfx Banshee based card and the motherboard of your PC.

You might try fiddeling with PCI related settings in the BIOS. Try setting the PCI Latency timer to 64. (32 is default in most cases).

By the way, what kind of motherboard are you using. I never experienced compatibility problems between the Banshee cards and motherboards so I'm interested in troubleshooting your problem.

IP Logged

Ryujin Guest	Re: Voodoo Banshee on WinXp Reply #2 - 11.05.06 at 17:51:10 My motherboard is a Asus A7m266. I'm positive that the Graphic card is working because it worked normaly twice in this mobo, but when rebooting it goes always to 4 bit. I also notice that the heatsink is very hot, is that normal?
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page