3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
This & That >> Marketplace >> [?] ASUS A7M-266D (Dual SocketA Motherboard)
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1176926350

Message started by FalconFly on 18.04.07 at 21:59:10

Title: [?] ASUS A7M-266D (Dual SocketA Motherboard)
Post by FalconFly on 18.04.07 at 21:59:10
I was wondering if there is possibly any interest in that used Motherboard...

Pro's :
- supports upto 2x AthlonMP 2800+
- does not require any special RAM (runs on normal DDR RAM, no Registered and/or ECC needed).
- all Capacitors 100% okay

Con's :
- has been on duty for some ~20000h in my Network
- 'forgets' Clock time when physically disconnected from Power for a longer time (possibly can be fixed with a new CMOS Battery)

Images : Link
Docs / Support : Link

Title: Re: [?] ASUS A7M-266D (Dual SocketA Motherboard)
Post by Obi-Wan_Kenobi on 19.04.07 at 00:57:43
hmm I'm interested :)

Dunno what you would want for it and what does it come with, is it just the mobo or does it have 2 Barton 2800+ CPU's with some ram?

It would be nice as my server for my new home FalconFly 8)

Well What I can remember is when I had my ASUS A7M266-D with 2 MP 2200+ CPU's I had to use ECC Reg PC-2100 for my SMP setup, since I tried normal unregistred as non ECC ram and it did not boot, so I bought 1x 1GB PC2100 ECC Reg from Twin-Moss and it was a splendid setup for FS 2004 with a nice Hercules Radeon 9700 pro and a SB Audigy2 Platinum.

About the clocktime prob , a new CMOS batt should indeed do the trick, i had the same with my ABiT VP6 with Dual P3 1Ghz Coppermines ;D heh it even booted in german too haha was a funny setup that one Grun syteme

Title: Re: [?] ASUS A7M-266D (Dual SocketA Motherboard)
Post by FalconFly on 19.04.07 at 06:27:09
I do have the both MP 2800+ and various RAM, but I plan to sell those on EBay.

I have no special price in mind for older Motherboards, so any evaluation will be noted.

Title: Re: [?] ASUS A7M-266D (Dual SocketA Motherboard)
Post by exxe on 19.04.07 at 08:40:52
is it testet with a 3dfx Voodoo5 6000 AGP (3700a) ?

Title: Re: [?] ASUS A7M-266D (Dual SocketA Motherboard)
Post by Obi-Wan_Kenobi on 19.04.07 at 12:20:58

wrote on 19.04.07 at 08:40:52:
is it testet with a 3dfx Voodoo5 6000 AGP (3700a) ?


the ASUS A7V266-D isn't compliant with the 6000, I had one myself Exxe ;)

Title: Re: [?] ASUS A7M-266D (Dual SocketA Motherboard)
Post by FalconFly on 20.04.07 at 08:31:35
The Board has an AGP Protection circuit, any 3.3V AGP card will not be powered up and an AGP Warning LED is lit.

Title: Re: [?] ASUS A7M-266D (Dual SocketA Motherboard)
Post by Obi-Wan_Kenobi on 20.04.07 at 18:56:28
okay Ill take it for 35 euro's including the shipping

Title: Re: [?] ASUS A7M-266D (Dual SocketA Motherboard)
Post by FalconFly on 20.04.07 at 21:28:53
I call that a good offer, it's yours then if you like :)

Title: Re: [?] ASUS A7M-266D (Dual SocketA Motherboard)
Post by Obi-Wan_Kenobi on 20.04.07 at 23:09:15

wrote on 20.04.07 at 21:28:53:
I call that a good offer, it's yours then if you like :)



Norries!! Crikey mate thanx I'm in Whoo Hooooo !!!  8)

Title: Re: [?] ASUS A7M-266D (Dual SocketA Motherboard)
Post by ultima on 27.04.07 at 08:13:35
about those MP2800+, you said you wanna sell em on ebay, but what general price do you have in mind??

I could use one for my 3dfx rig.

Title: Re: [?] ASUS A7M-266D (Dual SocketA Motherboard)
Post by FalconFly on 27.04.07 at 08:20:46
They'll be on Ebay as a Pair next week, together with the RAM.
(mainly because I have no clue of their current value , they're almost nowhere to find nowadays even here on EBay)

Title: Re: [?] ASUS A7M-266D (Dual SocketA Motherboard)
Post by ultima on 27.04.07 at 09:40:46
ahh too bad, I only need one. :(

Good luck with selling them, I'm sure that they'll give you enough money.

After all, they are one of the fastest socket A cpu's and they are multiplier unlocked, so.....probably gonna be a lotta people wanting those. :)

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.