That's right a Voodoo Graphics card with 512MB of PC133 SDram, 7ns Kingston (the good stuff)

http://img243.imageshack.us/img243/553/v1w512pc133cv4.th.jpg
  Click on the image


$30.00 + $7.00 International S & H

Or you can bid on this guy's http://cgi.ebay.com/Kingston-512MB-2X256-PC133-168Pin-SDRAM-KTH6501-256_W0QQitemZ250052921828


This is not the cheap stuff "ValueRAM"

What will be cost of delivery?  ;)

Letter Post Airmail is pretty cheap. I was able to ship 3 Q3D CDs to Mystychat (France) for around 7USD in a bubble pack envelope. That's the key, it has to be in an envelope. Did you want the voodoo card?

I can't list things here unless it is 3dfx theme ;)

wrote on 10.12.06 at 22:14:06:

That's right a Voodoo Graphics card with 512MB of PC133 SDram, 7ns Kingston (the good stuff)

Figures I just purchased 512 mb of the stuff a few weeks ago for a friend from newegg.

Tempted just to buy it for the heck of it.

I think it's sold..

I do have a single stick of 512MB PC133 Could be had with or without V1 card ;)


I need to lay out all my stuff and take a pic for everyone to pick through. Of course there will be a few Voodoo 1 and 2 cards to keep the admins happy :-X <j/k>

Dude, you really need to change the post name to [S] Voodoo card w/512 stick of ram. When I first seen your post I thought the voodoo card had 512 on it some how :P  Needless to say I was drinking at the time but still...... I almost fell out of my chair when I seen it.  ;D

Yeah I know :-/

I was trying to live in things up a bit. Things have been kind of quiet around here. Then Hank passed by.. Wow :o Did you see what I picked up earlier today from Hank?

WooHoo 8)

Let me know if the buyer falls through on the board and ram.

If a single stick will work 512 I can make that happen.

The only problem is some older MoBos can't take it. That's what made the 2 sticks of 256 nice.

This stick will NOT work in the Seattle BX2 board but the 2 X 256s works fine.

I had it in an ECS motherboard that would take SD or DDR The P4VXASD2+ with a 2.4 Pentium4.

As a matter a fact, I'm getting ready to pull that board and sell it because I have a P4 3.2 going into that case. I should prolly sell those all together :-/

I seem to do better selling this stuff seperatelt but it's such a PITA!

My current project is suppose to support two sticks of 256MB SDRAM ECC but reports only 256 total.

Diagnostic software reports the ram specs correct but the MB and Windows only is seeing 256.  >:(

What happens with only 1 stick installed (128MB)?

The reason I ask is I have had some motherboards that could only read the memory on one side. I'm guessing this is the case and your memory has chips on both sides. Try some single sided sticks.

LMK

wrote on 19.12.06 at 04:58:09:

Try some single sided sticks.

Don't have a pair of single sided 256 mb handy.