3dfx Archive - P4 800fsb in a 533fsb mobo

BFG3dfx Ex Member	P4 800fsb in a 533fsb mobo 09.09.05 at 02:39:23 Ok all you intel fan's, can i put a 478pin 800fsb P4 in a 478pin 533fsb mobo, if i can what is the result, such as does it run same mhz but lower 533fsb or does it just catch fire and burn my place down ???
Back to top	IP Logged

gamma742 God Member Offline 3Dfx Gamer Posts: 1668 San Diego, CA USA Gender:	Re: P4 800fsb in a 533fsb mobo Reply #1 - 09.09.05 at 04:10:59 First thing you should check is the 533 a Hyperthreader. I think all of the 800FSB chips are. I had a friend ask me to take a look at his machine (just built) was running like a 133 He had a 3.06 hyper chip in a non-hyperthreading mobo. It was 533 to 533fsb so everthing was fine after a trip to Fry's to P U a new mobo.
Back to top	Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best... IP Logged

BFG3dfx Ex Member	Re: P4 800fsb in a 533fsb mobo Reply #2 - 09.09.05 at 04:37:33 Remark: 1. CPU internal core bus speed runs at 400/533MHz. 2. * Support Intel Hyper-Threading Technology. 3. Prescott/Celeron D processor are not supported
Back to top	IP Logged

BFG3dfx Ex Member	Re: P4 800fsb in a 533fsb mobo Reply #3 - 09.09.05 at 04:56:59 no use chancing it i guess, it will take a 3.o6 533fsb northwood, do you know if this is a good o/cer?
Back to top	IP Logged

Thandor

Ex Member

What's the fuzz all about?

Re: P4 800fsb in a 533fsb mobo
Reply #4 - 09.09.05 at 13:03:14

Quote:

no use chancing it i guess, it will take a 3.o6 533fsb northwood, do you know if this is a good o/cer?

No, I won't overclock that good since the core is pretty old and already at a workable top. To overclock you'll get a few MHz but that'is.

You could also try to find an Intel Pentium 2,66GHz or 2,8GHz which will perform quite good.

Back to top

Click here to see my collection of CPU's and GPU's!

IP Logged

NitroX infinity YaBB Moderator Offline Posts: 1936 The Netherlands Gender:	Re: P4 800fsb in a 533fsb mobo Reply #5 - 09.09.05 at 13:08:16 BFG3dfx, what motherboard do you have?
Back to top	My Blog IP Logged

gamma742 God Member Offline 3Dfx Gamer Posts: 1668 San Diego, CA USA Gender:	Re: P4 800fsb in a 533fsb mobo Reply #6 - 10.09.05 at 04:00:12 I've heard the 2.4 800fsb O.C. well Donno since I mainly run AMD for OCing. Intel has been lagging lately in the MHz race.
Back to top	Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best... IP Logged

NitroX infinity YaBB Moderator Offline Posts: 1936 The Netherlands Gender:	Re: P4 800fsb in a 533fsb mobo Reply #7 - 10.09.05 at 10:23:01 Quote: Intel has been lagging lately in the MHz race. Yeah, ain't it great They're switching to a modified Pentium M architecture which will consume like a third of the power that a Prescott uses. (the new cores, not the current p-m)
Back to top	My Blog IP Logged

BFG3dfx

Ex Member

Re: P4 800fsb in a 533fsb mobo
Reply #8 - 10.09.05 at 18:18:09

i picked up a ss51g shuttle box, i was really trying to find a micro board for my v5 5500agp but all the ones made were too slow, so i got this shuttle, it takes the p4 3.06/533 tops but that will be cool, not really a intel fan but no choice on this one. nice thing about this board is shuttle checked it with the v5 5500 agp so im just waiting on my case(micro size) and then i'll have my micro slepper box, lol

Back to top

IP Logged

gamma742 God Member Offline 3Dfx Gamer Posts: 1668 San Diego, CA USA Gender:	Re: P4 800fsb in a 533fsb mobo Reply #9 - 11.09.05 at 02:42:49 Wow! A P4 Intel with the correct AGP voltage. Nice find!!
Back to top	Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best... IP Logged

Obi-Wan_Kenobi Ex Member	Re: P4 800fsb in a 533fsb mobo Reply #10 - 23.09.05 at 01:20:33 wow yeah nice find indeed, what is it's chipset, is it a SiS chipset btw?
Back to top	IP Logged

BFG3dfx Ex Member	Re: P4 800fsb in a 533fsb mobo Reply #11 - 23.09.05 at 03:30:15 sis 651 nb and sis 962l sb
Back to top	IP Logged

Obi-Wan_Kenobi Ex Member	Re: P4 800fsb in a 533fsb mobo Reply #12 - 23.09.05 at 10:42:36 and is it comparable to the Intel i845? qua performance?
Back to top	IP Logged

BFG3dfx

Ex Member

Re: P4 800fsb in a 533fsb mobo
Reply #13 - 23.09.05 at 21:52:17

dont really know about the perfomance yet as i havent got to use it yet, im waiting on a case for it and then i have to buy a cpu and some ram, this will be the first intel pc ive ever built for myself, ive built about 10 amd pc so far, my brother likes intel but my pc;s have always kicked his pc's a$$e$ lol. but for the micro case i needed a small mobo and amd didnt have anything good that was compatible with the v5 5500agp card, im really hoping this will be a good cpu, im either gonna get the 2.8 or the 3.06, im leaning towards the 2.8 because im gonna o/c it and i heard that was a good choice, but im not sure.

Back to top

IP Logged

Obi-Wan_Kenobi

Ex Member

Re: P4 800fsb in a 533fsb mobo
Reply #14 - 24.09.05 at 03:41:37

heeh AMD has been kisk'n itels but for eons since the launch of thier first K7 Athlon Slot 1 Grin

Yeah the Pentium4 2.80 Ghz Northwood seem to be great OC'ers indeedydo:) a my neighbour man accros the road has a 2.8 he used the stock Intel cooler and he OC'ed it to a nice 3.2ghz

not bad. he chickened out after 3.2Ghz, I said come on push it up ! haha he didn't want to oh well.

But don't worry that 2.8 should do fine Wink

Back to top

IP Logged

	Welcome, Guest. Please Login