Welcome, Guest. Please Login 3dfx Archive
 
 
  HomeHelpSearchLogin  
 
  3dfx Archive › 3dfx Section › 3dfx Drivers › 3500 TV PAL
(Moderators: FalconFly, gdonovan, NitroX infinity)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1
Send Topic Print
3500 TV PAL (Read 171 times)
Guest
Guest
3500 TV PAL
05.06.04 at 21:39:38  
I foond a Int'l version of the 3500 TV, must be PAL.
Can I use it with NTSC, flash the BIOS with NTSC code?
Back to top
 
 
IP Logged
 
FalconFly
YaBB Administrator
*****
Offline


3dfx Archivist

Posts: 2445
5335N 00745E
Gender: male
Re: 3500 TV PAL
Reply #1 - 06.06.04 at 09:06:02  
Hm, I think you can't simply flash the Bios of the Card to solve that Problem. (at least I never heard of this being a solution)

Did you try the V3-3500 TV Standard Select from the Tools Section ?
It might do the Trick, so it's worth giving a try...
Back to top
 
WWW  
IP Logged
 
Guest
Guest
Re: 3500 TV PAL
Reply #2 - 06.06.04 at 14:33:19  
Thanks for the info, it appears that the INt'L (the one I have)l version of the 3500 can support video in/out for NTSC with the software. However the tuner is 'hardcoded' for either PAL/SECAM or NTSC. SO the card works but recieives a 'rolling picture' when the tuner is connected.

Thanks
Back to top
 
 
IP Logged
 
FalconFly
YaBB Administrator
*****
Offline


3dfx Archivist

Posts: 2445
5335N 00745E
Gender: male
Re: 3500 TV PAL
Reply #3 - 06.06.04 at 15:03:07  
Yep, that might be, since the Cards were specifically manufactured for the regions they've been meant to operate in  Undecided
Back to top
 
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge