3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> Voodoo2 Help
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1203482158

Message started by Durandal_22 on 20.02.08 at 06:35:58

Title: Voodoo2 Help
Post by Durandal_22 on 20.02.08 at 06:35:58
I got a rage 128 and would like to install a voodoo2, how can i do this?

Title: Re: Voodoo2 Help
Post by ps47 on 20.02.08 at 09:07:10
turn of the pc,pop in the v2,connect it to the rage with the pass-through cable,connect your monitor to the v2,boot to your OS,load driver.done.more stuff is on the helppage,see my sig if required.

Title: Re: Voodoo2 Help
Post by Durandal_22 on 21.02.08 at 01:10:33
i wondered what that cable was for. thanks

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.