Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
More RAM = Less performance? (Read 369 times)
mirage111
YaBB Newbies
*
Offline


3dfx enthusiast

Posts: 42
Spain
Gender: male
More RAM = Less performance?
09.01.15 at 23:13:09
 
Hi folks,

I am testing a K6-2 system and I've found a curious problem...

Basically the more RAM I install, the worse is the 3D performance.

I've tested from 64 to 512Mb with combinations of various PC133 modules. With 64 the system flyes, but starting with 128 and more the performance decreases. I've done the tests with 3DMark99 and 2000.

I don't understand what's wrong, it should be the opposite. More RAM should give better performance!

Have you got any idea of what's going on? This computer is driving me crazy haha  Shocked

Back to top
 

Voodoo3 3000 AGP
 
IP Logged
 
anthony
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 36
Re: More RAM = Less performance?
Reply #1 - 10.01.15 at 07:53:57
 
think chipset can't cache more than 64mb
Back to top
 
 
IP Logged
 
ultima
God Member
*****
Offline


Always searching

Posts: 876
The Netherlands
Gender: male
Re: More RAM = Less performance?
Reply #2 - 10.01.15 at 13:35:26
 
mirage111 wrote on 09.01.15 at 23:13:09:
Hi folks,

I am testing a K6-2 system and I've found a curious problem...

Basically the more RAM I install, the worse is the 3D performance.

I've tested from 64 to 512Mb with combinations of various PC133 modules. With 64 the system flyes, but starting with 128 and more the performance decreases. I've done the tests with 3DMark99 and 2000.

I don't understand what's wrong, it should be the opposite. More RAM should give better performance!

Have you got any idea of what's going on? This computer is driving me crazy haha  Shocked



uhmm, just a small correction.....more ram does not equal better performance...it does to a certain degree, but better statement is ram doesn't decrease performance......or at least it shouldn't Smiley

What OS are you running? win98? if so, be sure to install the patch for more ram capability, since originally, win98 doesn't like ram above 256MB all that much Smiley
Back to top
 

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
 
IP Logged
 
mirage111
YaBB Newbies
*
Offline


3dfx enthusiast

Posts: 42
Spain
Gender: male
Re: More RAM = Less performance?
Reply #3 - 10.01.15 at 14:20:13
 
Ok, I am using 98SE, anyway 64Mb is little amount of RAM and the performance start decreasing even with 128.

Where can I get that patch? I've never heard about it.

Maybe could be some wrong BIOS config also? I've reseted defaults though.
Back to top
 

Voodoo3 3000 AGP
 
IP Logged
 
ultima
God Member
*****
Offline


Always searching

Posts: 876
The Netherlands
Gender: male
Re: More RAM = Less performance?
Reply #4 - 10.01.15 at 14:38:41
 
Google for win98se unofficial servicepack, it is included in that.

But if it becomes noticable even with only 128MB....then I think something else is wrong.

Can you motherboard model, what kinda ram etc etc?!
Back to top
 

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
 
IP Logged
 
mirage111
YaBB Newbies
*
Offline


3dfx enthusiast

Posts: 42
Spain
Gender: male
Re: More RAM = Less performance?
Reply #5 - 10.01.15 at 16:31:07
 
Ah, ok! I will try the service pack anyway and see what happens, I don't loose nothing for trying...

The motherboard is a SP-A586B, here you are some info about it: http://www.sceusa.com/a586b.htm It's a typical Ali K6 motherboard from that time.

I've tried with many different ram modules to discard a failure in the module itself. These are PC133, except the 64Mb module wich is PC100, and they are from different brands, Kingston, etc...

The processor is a K6-2 400 overclocked to 450 but I've tried at 400 and nothing changes, well, it is a bit slower of course.

The video card I am using is Voodoo 3 3000 agp and it is a fresh Win98 install. I've only installed video drivers yet.
Back to top
 

Voodoo3 3000 AGP
 
IP Logged
 
EMPEROR
Junior Member
**
Offline


3dfx enthusiast

Posts: 67
Germany
Gender: male
Re: More RAM = Less performance?
Reply #6 - 10.01.15 at 16:34:45
 
Try also the newest bios possible. And see in bios if your memory timings are set to automatic... maybe when you put more ram, the bios sets higher latency for compatibility and thus the memory works a bit slower, so the overall performance is slower.
Back to top
 
disharmoniser https://www.facebook.com/lachezar.stefanov.35  
IP Logged
 
Thandor
Full Member
***
Offline


What's the fuzz all about?

Posts: 226
Re: More RAM = Less performance?
Reply #7 - 10.01.15 at 19:24:02
 
As suggested take a look at the BIOS settings. Also note that your Aladdin V chipset can only cache 128MB RAM when it's fitted with 512k L2-cache. Does your motherboard have 512k L2-cache installed (or perhaps enabled in the BIOS)?
Back to top
 
WWW  
IP Logged
 
mirage111
YaBB Newbies
*
Offline


3dfx enthusiast

Posts: 42
Spain
Gender: male
Re: More RAM = Less performance?
Reply #8 - 11.01.15 at 14:36:37
 
My board has 512Kb cache and it is activated in BIOS. Thandor, do you mean that more than 128Mb RAM is useless  with this chipset and this amount of cache? However, in that case, adding more RAM shouldn't make the system slow, shouldn't it?

Well, I've installed the service pack and the problem is still there but I have managed to put 128Mb without performance loss, using a single module. I've also tried with a 256Mb single module and the performance falls again, and I am not talking about a little bit loss, it is clearly noticeable.

I've also checked the BIOS as you suggested but I think it is OK. Anyway, here are two pics, so you can tell me if you see something wrong.

...

...
Back to top
 

Voodoo3 3000 AGP
 
IP Logged
 
goriath
God Member
*****
Offline


Ruggedized Retro Gamer

Posts: 599
Italy/Slovenija
Gender: male
Re: More RAM = Less performance?
Reply #9 - 11.01.15 at 15:21:52
 
Let's take a look at SDRAM modules you're using...

You said the first 64MB module is PC100, others are PC133...
You managed to get no performance loss still with a single 128MB module, anyway with 256MB performance decreases (256MB single module or 2x128MB?)

Take notice of the following:
1) The loss seems to be related to memory size or there are other factors like single sided or double sided SDRAM modules?
2) The loss could be related to the number of the slots and/or the specific slot you populate? Try check this populating different slots and try different combos...

And I strongly suggest you to upgrade your BIOS.
Back to top
 

...
OLD SCHOOL: Because it was done right the first time
 
IP Logged
 
Thandor
Full Member
***
Offline


What's the fuzz all about?

Posts: 226
Re: More RAM = Less performance?
Reply #10 - 12.01.15 at 22:26:23
 
mirage111 wrote on 11.01.15 at 14:36:37:
My board has 512Kb cache and it is activated in BIOS. Thandor, do you mean that more than 128Mb RAM is useless  with this chipset and this amount of cache? However, in that case, adding more RAM shouldn't make the system slow, shouldn't it?
Yes, with more than 128MB RAM it will generally be slower because it won't be cacheable. More than 128MB will only be faster if you really need 256MB or 512MB of RAM. (Uncached RAM is always faster than caching to a traditional hard-drive, but cached RAM is faster than uncached RAM and will do just fine if you 'only' need 128MB RAM).

Quote:
Well, I've installed the service pack and the problem is still there
As far as I know the unofficial service pack won't allow you to use more than 512MB RAM in Windows '98 SE, it will only make sure that Windows '98 SE shows the correct amount of RAM if you have (too) much RAM installed.
Quote:
but I have managed to put 128Mb without performance loss, using a single module. I've also tried with a 256Mb single module and the performance falls again, and I am not talking about a little bit loss, it is clearly noticeable.
So you just have to stick with one 128MB RAM module.

Quote:
I've also checked the BIOS as you suggested but I think it is OK. Anyway, here are two pics, so you can tell me if you see something wrong.
I would say it's pretty much OK. You can try to configure 'SDRAM CAS Latency' to 2.5 (or even 2.0) depending on your RAM module. Often 100MHz modules are CAS2.5. If you run a 133MHz CAS3.0 module on 100MHz you can configure it for CAS2.5 if you run it at 100MHz.
Back to top
 
WWW  
IP Logged
 
ultima
God Member
*****
Offline


Always searching

Posts: 876
The Netherlands
Gender: male
Re: More RAM = Less performance?
Reply #11 - 13.01.15 at 20:07:07
 
better yet, take a picture of the ram module....often the speed in nanoseconds is printed on it.

8ns = 100Mhz cas2
7.5ns = 133Mhz cas3
7ns = 90% of the time capable of 133Mhz cas2
Back to top
« Last Edit: 13.01.15 at 20:07:40 by ultima »  

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
 
IP Logged
 
mirage111
YaBB Newbies
*
Offline


3dfx enthusiast

Posts: 42
Spain
Gender: male
Re: More RAM = Less performance?
Reply #12 - 17.01.15 at 16:59:56
 
Those are the modules I've tested:

...

All of them are single sided except the Kingston 256, and all of them are PC133 except the IBM module, wich is PC100 as you can see.

Well, let's go for one thing at a time.

Goriath, the loss seems to be related to the amount of memory installed. I've tried different combos like 128+128, 256+128, 128+128+256, and so on... Everything over 128Mb results in a performance loss. I've also tried different slots in the board, with no difference.
I relation to BIOS updating, the board I'm using has version A7 and the newest I found is version A9. I have also another board of the same model, but older, wich has version A3. I will test the version A3 with more than 128Mb and see what happens. At the time I prefer not to update BIOS because those old parts are getting hard to find for me and, you know, something could go wrong and ruin the board. So I keep update as the last try.

Thandor, I don't need more than 128 really, 'cause I use these computers for gaming the games of that era, you know, Unreal, Quake, etc... And they go fine with 128, but I've never seen a worst performance with more RAM so I'm curious about it, and want to find out if there is a problem or it's just the way it works.
About CAS latency configuration in the BIOS, I've tried 2 and 3 (There is no 2.5 setting in my BIOS) but it's the same.

Ultima, I see the 133 modules have 75 printed in some places, so I think they are 7.5ns modules. Anyway, you can check the picture.

Thank you for your great help guys, I always learn a lot from this forum.
Back to top
 

Voodoo3 3000 AGP
 
IP Logged
 
Geri
Full Member
***
Offline



Posts: 216
Gender: male
Re: More RAM = Less performance?
Reply #13 - 20.02.15 at 00:17:16
 
hi

the ALI chipset used on s7 boards only supports properly 128 mbyte ram.
and you should not even consider buying a new motherboard for your socket7 cpus - almost all of them is limited to 128 mbyte. you are lucky, becouse the ALI chipset boots with 2x128 mbyte, however, you loose some speed.

it will not properly boot with 1x256 mbyte ram trough: it will randonmy detect it as 512 mbyte RAM, and you need to press power button on and off a few times to have detect it properly as 256 (reset is not enough...).

you should be satisfyed with the current operation.
Back to top
« Last Edit: 20.02.15 at 00:19:30 by Geri »  
my skype address is geri_lgfx  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print