3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl 3dfx Section >> 3dfx Drivers >> tv problems with 3 3500 anv win2k http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1055878716 Message started by beoquaz on 17.06.03 at 21:38:35

Title: tv problems with 3 3500 anv win2k
Post by beoquaz on 17.06.03 at 21:38:35

i get the message "the tv drivers are not installed. please install them by pressing the driver button after re-installing the installation CD in the cd-rom drivee"

like i said i have win 2k!
shuld i install the VR first or the driver?

/ted

Title: Re: tv problems with 3 3500 anv win2k
Post by beoquaz on 18.06.03 at 11:31:36

but that dosent work!

do i have tv and radio? is it in all models? i have 3 3500 tv out!

Title: Re: tv problems with 3 3500 anv win2k
Post by beoquaz on 19.06.03 at 16:51:47

hmm, dosent work!

should i remove all the other drivers or can i install over?

i installed the drivers first! in 640*480!!
then the vr drivers!

what an i doing wrong?

Title: Re: tv problems with 3 3500 anv win2k
Post by beoquaz on 19.06.03 at 22:41:07

org drivers from 3dfx.com or voodoofiles.com

but if i got it all right you must use the 3rd party drivers to get the tv and radio going right?

Title: Re: tv problems with 3 3500 anv win2k
Post by beoquaz on 20.06.03 at 12:44:44

i run english win 2k, pal i think
i live in sweden

i have no problems installing the drivers byt when i install VR i get the messege that the tv drivers are not installed!!

which drivers and VR should i use?