| 3dfx Archive | |
|
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> VooDooTV 100: missing cable channels. http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1115664069 Message started by Bedfford on 09.05.05 at 20:41:09 |
|
|
Title: VooDooTV 100: missing cable channels. Post by Bedfford on 09.05.05 at 20:41:09
Hi.
I have a VooDooTV 100 PCI ( plus VisualReality v3.10.06 buid 406 ), and for a strange reason I can't see some cable channels. I use AutoScan feature and activate channels manualy too, but the problem still present. The missing channels are: 14 to 20, 40 to 62 ( NTSC-M system ) Maybe is a soft problem, but I don't know if exist any compatible soft ( like VisualReality ) for this card. Any comment or help are welcome. Thanks. |
|
Title: Re: VooDooTV 100: missing cable channels. Post by FalconFly on 09.05.05 at 23:16:26
If VisualReality doesn't work properly, you could try :
DScaler http://deinterlace.sourceforge.net/ BTwincap http://btwincap.sourceforge.net/ Alot of people used those after encountering Problems with VisualReality. |
|
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |