3dfx Archive - Speed Voodoo4 AGP

exxe God Member Offline ^^ Posts: 1316 germany	Speed Voodoo4 AGP 02.12.06 at 12:25:47 i got a Speed Voodoo4 AGP, but this card is very strange - there are TV out connectors on the Card, and all SMDs like a PowerColor have, but no TV chip and no 2nd "Crystal oscillator". - the memory is TC- 7, 143MHz - near the D-sub some SMDs missing
Back to top	IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: Speed Voodoo4 AGP Reply #1 - 02.12.06 at 16:00:24 Parts were left off to save money- I would not run the card long as Hank indicated one way they saved some money was by not including a 2.9 volt regulator for the core voltage and are running the VSA-100 at 3.3 AGP volts.
Back to top	Rampage is alive! IP Logged

elfuego Senior Member Offline Searching for V5 6k... Posts: 420 Aachen, Deutschland Gender:	Re: Speed Voodoo4 AGP Reply #2 - 02.12.06 at 21:49:34 Quote: Parts were left off to save money- I would not run the card long as Hank indicated one way they saved some money was by not including a 2.9 volt regulator for the core voltage and are running the VSA-100 at 3.3 AGP volts. There might be a way to lower the AGP voltage in BIOS. Will it work then?
Back to top	Take the Magic: The Gathering 'What Color Are You?' Quiz. IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: Speed Voodoo4 AGP Reply #3 - 03.12.06 at 00:31:28 Well it will work at the normal 3.3 AGP, the question is for how long? The core runs very, very hot with 3.3 input. Lowering the AGP voltage might help the core longevity but introduce other issues.
Back to top	« Last Edit: 03.12.06 at 14:50:36 by gdonovan » Rampage is alive! IP Logged

elfuego Senior Member Offline Searching for V5 6k... Posts: 420 Aachen, Deutschland Gender:	Re: Speed Voodoo4 AGP Reply #4 - 03.12.06 at 20:10:21 Quote: Well it will work at the normal 3.3 AGP, the question is for how long? The core runs very, very hot with 3.3 input. Then he should use the best out of it. Overclock the card - and get it some active cooling like an old and reliable titan orb
Back to top	Take the Magic: The Gathering 'What Color Are You?' Quiz. IP Logged

exxe God Member Offline ^^ Posts: 1316 germany	Re: Speed Voodoo4 AGP Reply #5 - 03.12.06 at 21:56:10 problem is i get a VGA ok peep but no picture on the monitor
Back to top	IP Logged

Obi-Wan_Kenobi Ex Member	Re: Speed Voodoo4 AGP Reply #6 - 04.12.06 at 00:28:42 Quote: Then he should use the best out of it. Overclock the card - and get it some active cooling like an old and reliable titan orb well it's not a common card like a Geforce or a Radeon , this card is alot rarer and not worth overclocking it while it's not even working properly which that could defect it instead.
Back to top	« Last Edit: 04.12.06 at 01:07:08 by N/A » IP Logged

paulpsomiadis God Member Offline -=3Dfx still rox!=- Posts: 2011 Newcastle U.K. Gender:	Re: Speed Voodoo4 AGP Reply #7 - 04.12.06 at 02:15:09 Quote: no picture on the monitor ...it might already be defective!
Back to top	-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+ IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: Speed Voodoo4 AGP Reply #8 - 04.12.06 at 03:13:26 What motherboard did you use for testing? I'm pretty sure it is an AGP 3.3 volt part only like the Powercolor Voodoo 4's
Back to top	Rampage is alive! IP Logged

exxe God Member Offline ^^ Posts: 1316 germany	Re: Speed Voodoo4 AGP Reply #9 - 04.12.06 at 09:24:24 a ASUS P2B-DS rev 1.06 D for DUAL, S for SCSI onboard) only 3,3vAGP board i have
Back to top	IP Logged

Obi-Wan_Kenobi Ex Member	Re: Speed Voodoo4 AGP Reply #10 - 04.12.06 at 12:14:35 hmm that board has a true AGP x2 slot which shouldn't be a problem actually , heh wierd exxe
Back to top	« Last Edit: 04.12.06 at 12:15:02 by N/A » IP Logged

Bustar

YaBB Newbies

Offline

I love YaBB 1G - SP1!

Posts: 9

Re: Speed Voodoo4 AGP
Reply #11 - 24.12.06 at 07:03:49

Hi Guys,
Heh, I have an L-shaped Voodoo4 4500 - according to the site thedodgegarage.com/3dfx it is the OEM version of the Powercolor card. Since I do not know much about electricity, capacitors, voltage regulators, etc. I would like to ask if there is a problem running this card on newer mainboards. I had not done it so far, I was not sure if that would be safe. I tested the card for a few days on an MSI 6309 board - this one has AGP 2, I guess, and it ran without any problems. It is slower than a Geforce2 MX 400 with 32 MB of RAM, though. I am certainly keeping the card of course - the only V4 I have so far, I just wanted to know if it is safe to use it for a long time.

Greetings to everyone and have a Merry Christmas: Bustar

Back to top

IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: Speed Voodoo4 AGP Reply #12 - 24.12.06 at 09:45:52 If I recall correct the Powercolor Voodoo 4's are 3.3 volt boards, not 1.5v/3.3v like the 3dfx Voodoo 4's. When I tested mine the motherboard BIOS indicated they were pulling 3.3 so you might have a problem with a motherboard that does not supply that voltage.
Back to top	Rampage is alive! IP Logged

exxe God Member Offline ^^ Posts: 1316 germany	Re: Speed Voodoo4 AGP Reply #13 - 28.12.06 at 10:37:43 http://img147.imageshack.us/img147/715/powercolorv4lek4btl7.jpg
Back to top	IP Logged

	Welcome, Guest. Please Login