3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> Voodoo 5 and AGP port http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1061765481 Message started by Phonix on 25.08.03 at 00:51:20 |
Title: Voodoo 5 and AGP port Post by Phonix on 25.08.03 at 00:51:20
I'm looking to buy a Voodoo 5 5500 to be able to get max performance out of some older flight sims. However, in just trolling arround the net I read that some newer motherboards may not run the V5500 due to the wrong AGP voltage. My board only supports 1.5 volt AGP cards, but I can't s seem to find out what the voltage for a V5500 is.
Any help would be apprecated. Is there a location where a V5500 spec sheet might be found? |
Title: Re: Voodoo 5 and AGP port Post by Rolo01 on 25.08.03 at 10:17:38
Just buy a V5-5500 PCI and you will be fine...
|
Title: Re: Voodoo 5 and AGP port Post by Boiu_Andrei on 29.08.03 at 12:20:54 wrote on 25.08.03 at 00:51:20:
You can't use V5500 AGP on that motherboard. The PCI version will work fine. For specs of Voodoo5: ---------------------------------------------------------------------- 3dfx Voodoo5 5500 AGP Product Specifications 64 MB of Graphics Memory 667-733 Megapixels Per Second Fill Rate Real-time Full-Scene HW Anti-Aliasing T-Buffer™ Digital Cinematic Effect: Motion blur T-Buffer Digital Cinematic Effect: Depth of Field Blur T-Buffer Digital Cinematic Effect: Soft Shadows T-Buffer Digital Cinematic Effect: Soft Reflections ---------------------------------------------------------------------- The PCI V5500 is a little slower than the AGP, but has all the other specifications. |
Title: Re: Voodoo 5 and AGP port Post by janskjaer on 05.02.04 at 21:35:59 Quote:
What is this version CF, I keep hearing about??? Can someone explain the details! |
Title: Re: Voodoo 5 and AGP port Post by janskjaer on 09.02.04 at 19:38:47 wrote on 09.02.04 at 08:39:39:
What does this "lite" version entail? Would I be right in thinking that, it will be exactly the same as the KT400, but have a KT333 chipset? Which would mean a KT333 chipset motherboard with an AGP 4x/(possibly 8x also) AGP Slot? |
Title: Re: Voodoo 5 and AGP port Post by Micha on 09.02.04 at 19:59:21
here's a product comparison:
http://www.via.com.tw/en/apollo/kt400.jsp major point is the doubled v-link speed, so maybe the kt400 lite version has a down-clocked v-link to 266mb/s between the VT8377 & the newer VT8235 :-/ second point could be the cheaper ethernat controller of the kt400 (compared to the 3com controller mostly used with the kt333) and agp...dunno ;D |
Title: Re: Voodoo 5 and AGP port Post by janskjaer on 10.02.04 at 13:55:15
yes, the KT400 only supportss AGP 4x/8x, from the link you gave Micha. Therfore, my theory is correct! ;D
|
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |