3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> 3dfx Drivers >> What do I have http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1035411961 Message started by Wayne W on 24.10.02 at 00:26:00 |
Title: What do I have Post by Wayne W on 24.10.02 at 00:26:00
I just bought on ebay a card, without drivers. What drivers do I need and where do I find them? I am using an AMD 500 MHz CPU and Windows 98SE.
It has only the main Monitor Connection. Another Berg pin connector on the edge is not marked -- probably a test connection. The main chip is marked 3dfx 355-0025-001. Another chip is marked with a paper paste on label V3 1000, 2.15.05. Another paper label is Marked: Compaq Computer co, s9094 The FCC ID is: 3dfx 210-0383-001-A0. But I get no results from an ID search. There are some other labels which are just numbers that I can't make heads nor tails of. This Compaq number means nothing on the HP/Compaq site. With Compaq and 3dfx both swallowed up, have I bought a paper weight? Thanks wayne1932@juno.com |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |