3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> 3dfx Drivers >> What do I have
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1035411961

Message started by Wayne W on 24.10.02 at 00:26:00

Title: What do I have
Post by Wayne W on 24.10.02 at 00:26:00
I just bought on ebay a card, without drivers.  What drivers do I need and where do I find them?  I am using an AMD 500 MHz CPU and Windows 98SE.

It has only the main Monitor Connection.  Another Berg pin connector on the edge is not marked  -- probably a test connection.  

The main chip is marked 3dfx  355-0025-001.  
Another chip is marked with a paper paste on label V3 1000, 2.15.05.
Another paper label is Marked:   Compaq Computer co, s9094
The FCC ID is: 3dfx 210-0383-001-A0.  But I get no results from an ID search.  

There are some other labels which are just numbers that I can't make heads nor tails of.

This Compaq number means nothing on the HP/Compaq site.

With Compaq and 3dfx both swallowed up,  have I bought a paper weight?


Thanks
wayne1932@juno.com

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.