3dfx Archive - ntsc convert in pal format on voodoo rush

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › 3dfx Section › Tech Talk › ntsc convert in pal format on voodoo rush

(Moderators: NitroX infinity, gdonovan, FalconFly)

‹ Previous Topic | Next Topic ›

Pages: 1

ntsc convert in pal format on voodoo rush (Read 182 times)

tnx YaBB Newbies Offline 3dfx enthusiast Posts: 29 Italy Gender:	ntsc convert in pal format on voodoo rush 29.01.11 at 00:04:30 hello friends! today i have this question! My card (intense 3d) voodoo rush based with tv out on ntsc format... for convert to pal is possible? ...if flashing the bios with last release pal version? resolve?
Back to top	IP Logged

Thandor Full Member Offline What's the fuzz all about? Posts: 226	Re: ntsc convert in pal format on voodoo rush Reply #1 - 29.01.11 at 21:11:26 The Voodoo Rush has a special chip for TV-out functions so probably you have to swap (or flash, if possible) this chip. I guess flashing the regular BIOS won't work.
Back to top	Click here to see my collection of CPU's and GPU's! IP Logged

tnx YaBB Newbies Offline 3dfx enthusiast Posts: 29 Italy Gender:	Re: ntsc convert in pal format on voodoo rush Reply #2 - 30.01.11 at 00:02:25 Thandor wrote on 29.01.11 at 21:11:26: The Voodoo Rush has a special chip for TV-out functions so probably you have to swap (or flash, if possible) this chip. I guess flashing the regular BIOS won't work. on intergraph website is available for download latest bios card in two version: ntsc and pal.... help
Back to top	IP Logged

Thandor Full Member Offline What's the fuzz all about? Posts: 226	Re: ntsc convert in pal format on voodoo rush Reply #3 - 03.02.11 at 21:50:50 In my previous post I was assuming you also had to change the TV-out chip. I never tried it so I can't really tell what to do. Perhaps you can flash the BIOS and try if it works. If it won't start at all you might try to flash the old BIOS back by using a different PCI or ISA card.
Back to top	Click here to see my collection of CPU's and GPU's! IP Logged

tnx

YaBB Newbies

Offline

3dfx enthusiast

Posts: 29
Italy
Gender: male

Re: ntsc convert in pal format on voodoo rush
Reply #4 - 03.02.11 at 23:55:54

Thandor wrote on 03.02.11 at 21:50:50:

In my previous post I was assuming you also had to change the TV-out chip. I never tried it so I can't really tell what to do. Perhaps you can flash the BIOS and try if it works. If it won't start at all you might try to flash the old BIOS back by using a different PCI or ISA card.

I tried flashing the bios on a test-card! ....working, but not i have try for the moment the tv-out with new setting.
soon testing....

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page