| 3dfx Archive | |
|
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> 3dfx Drivers >> How do I figure out, if SLI is working?? http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1035734568 Message started by Dennis on 27.10.02 at 17:02:47 |
|
|
Title: How do I figure out, if SLI is working?? Post by Dennis on 27.10.02 at 17:02:47
Howdy!
Please, don't laugh, but I haven't used WIdnows for over 2 years, now. I usally use Linux. But I want to play the NFS serie, which isn't working with the newest WineX version. Therefore i installed on an other machine Windows with 2 Diamond Voodoo 2 Cards. So far now problem, I installed the driver, and everything seems fine. But, I don't now, if the SLI is working. How can I figure out,if it's working, b/c I just installed the driver, and I didn't do anything else. Thnx for any help. CU Dennis |
|
Title: Re: How do I figure out, if SLI is working?? Post by FalconFly on 27.10.02 at 18:06:06
Easy :
1024x768 is selectable in Games, w/ out SLI only 800x600 possible... The Driver should also install an Info Property Page in the Display Tabs, which will say "SLI : Detected!" if all is working :) |
|
Title: Re: How do I figure out, if SLI is working?? Post by FalconFly on 27.10.02 at 18:32:56
Hehe, it took you 8 Minutes longer to Write ;D
|
|
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |