3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl This & That >> This & That >> Does this card has any value? http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1415103498 Message started by mirage111 on 04.11.14 at 13:18:18

Title: Does this card has any value?
Post by mirage111 on 04.11.14 at 13:18:18

Hi guys,

I've recently found this card. An Alliance Semiconductor ProMotion AT3D 4Mb.

I didn't know it and can't find much info about it. Is it not common? Does it has any value or it's just trash?

It remembers me a lot to the Voodoo 1 standard design.

Title: Re: Does this card has any value?
Post by goriath on 04.11.14 at 13:37:07

I have one of these as well.
No particular value if you ask me but it is good for old Pentium platform if you want to add a Voodoo Graphics.

Title: Re: Does this card has any value?
Post by Geri on 25.11.14 at 15:14:48

what 3d capabilities does this chip have? what api it supports?

Title: Re: Does this card has any value?
Post by mirage111 on 29.11.14 at 22:47:55

As far as I know, it supports only early Direct3D. Don't know about capabilities, I haven't test it yet.

Title: Re: Does this card has any value?
Post by goriath on 30.11.14 at 14:33:13

ProMotion AT3D was the chipset 2D core chosen for 3Dfx Voodoo Rush.

Title: Re: Does this card has any value?
Post by ultima on 30.11.14 at 15:08:49

Tho some manufacturers chose the MX 2D chip instead, but vast majority was indeed the ProMotion chip