3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> 4116 update http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1153790836 Message started by gdonovan on 25.07.06 at 03:27:16 |
Title: 4116 update Post by gdonovan on 25.07.06 at 03:27:16 You can see the four heatsinks I attached to the faces of the Voodoo 3 chips, they will be cooled by a large case fan installed in the next PCI slot. Using the markings from the other 4116 in circulation I have attached 4 ground connections via a molex connector. The two yellow wires are 3.3V feeds taken from pin 11 of the ATX extention cable. The final two feeds are 2.6V, I'm working on a regulated source now and will post the results when I cobble something together. G |
Title: Re: 4116 update Post by gamma742 on 25.07.06 at 05:18:41
Do you have any drivers for the Beast?
|
Title: Re: 4116 update Post by Rolo01 on 25.07.06 at 10:05:26
Hi Gary,
very impressive. I cant wait to see that beast running... |
Title: Re: 4116 update Post by Obi-Wan_Kenobi on 25.07.06 at 11:21:59
hmm that looks wierd w00t can't wait to see it running, just by looking at it's multiple power connectors :o :o :o
|
Title: Re: 4116 update Post by gdonovan on 25.07.06 at 12:04:57 wrote on 25.07.06 at 05:18:41:
Not yet, have to do some checking around. |
Title: Re: 4116 update Post by GrandAdmiralThrawn on 26.07.06 at 08:41:37
Would be interesting to see if this thing performs at single v3 Speed with free FSAA, or if there is some "performance" mode giving you the speed of four v3's..
|
Title: Re: 4116 update Post by ps47 on 26.07.06 at 14:12:11
..that card is WICKED ;D
|
Title: Re: 4116 update Post by gamma742 on 27.07.06 at 00:27:00
It's probably built for free FSAA like the Mercury and the AAlchemy. Quantum3D was all about IQ.
|
Title: Re: 4116 update Post by NitroX infinity on 27.07.06 at 00:41:38 wrote on 27.07.06 at 00:27:00:
Uhm the 4116 is an AAlchemy too if I'm not mistaking ;) |
Title: Re: 4116 update Post by Obi-Wan_Kenobi on 27.07.06 at 01:02:53
well Gamma742 meant the 8164's hehe and yeaps this is an AALchemy 4116 indeedydo 8)
|
Title: Re: 4116 update Post by gamma742 on 28.07.06 at 01:01:42
@NitroX infinity
Yeah I mis-spoke (again), all the more reason I believe it's built for IQ and not speed. Off-topic; The Mercury system cap module I think says "AAlchemy" on it ??? |
Title: Re: 4116 update Post by SAT+KABEL on 11.03.07 at 22:27:26
@Gary
Did you managed the 2,6Volts issue ? |
Title: Re: 4116 update Post by paulpsomiadis on 11.03.07 at 23:16:21
Ture, true - this thread has been quiet for a while now... :-X
Would be cool to hear some news! 8) |
Title: Re: 4116 update Post by gamma742 on 12.03.07 at 03:05:59
That is quite a mysterious card there..
|
Title: Re: 4116 update Post by Obi-Wan_Kenobi on 12.03.07 at 12:24:16
@ Gary
Any new news on this monster of yours? It looks very demanding for some benchmarks of Quake3 Arena 8) |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |