3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> Daytonas http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1198585665 Message started by NitroX infinity on 25.12.07 at 13:27:45 |
Title: Re: Daytonas Post by OutOfRange on 25.12.07 at 14:53:39
got the same like the fourth ( 3dfx Voodoo 4-2 4200 PCI 143MHz 16MiB DDR-SGRAM DVI RevA1 )
but mine has "ASCEND" Memory with 6ns, PCB is 210-0424-001-A1 dated 4600. But i can't fire the baby up yet, just tested it on a Soyo KT333 Board, had a PCI Multimedia Device listed but no pic :( have to test it on another platform asap. it looks like there were a lot of more stickers at the board (mostly backside) because there are many glue rests still existing ??? and there are a lot of small scrachtes on the board (none is killing an electrical lane or something like that) |
Title: Re: Daytonas Post by exxe on 25.12.07 at 15:15:54
i also ahve a 210-0424-001-A1 dated 4600
6ns hynix hiundai dont work on a BX4400 board but fine on a nForce2 |
Title: Re: Daytonas Post by m14radu on 25.12.07 at 15:33:54
You can also post the owners ;D
These cards are very rare.. |
Title: Re: Daytonas Post by gamma742 on 25.12.07 at 17:42:57 wrote on 25.12.07 at 15:33:54:
Believe it or not, some owners prefer to remain private. Me, I wish I had bragging rights but I don't own one :( |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |