Hello to everyone. I have an A-Trend Voodoo Rush which doesn't work properly. As soon as the drivers are installed (tried different versions) in 2D there are terrible problems with picture quality. Some kind of black marks and lines. In 3D the card works some minutes without any problems of image quality but then the computer doesn't respond any more and the screen turns to black. The problem could be evoked by 2 x 2 twisted "contacts" of the 3dfx Chips (Two twisted on each chip). I got the card in this condition from ebay. I bended the contacts back carefully but maybe the card was already damaged as I got it (short circuit?). Fortunately I didn't pay too much. Please post possible solutions. Thanks to everyone

Here are the pictures. Sorry for delay.
They are really big, but so you can see every detail.
The twisted contacts are marked with a red circle.
The part which is marked with a little yellow arrow also doesn't look very good.
www.purplehaze.ch/~warheart/adyonline/vodoo_kaputt/01.jpg
www.purplehaze.ch/~warheart/adyonline/vodoo_kaputt/04.jpg