3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> Need broken V6K
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1125816250

Message started by st4r4m4m4 on 04.09.05 at 08:44:10

Title: Need broken V6K
Post by st4r4m4m4 on 04.09.05 at 08:44:10
Since I have no funds for a working one :P (wich it would be very nice)
I'd go for a fair priced non-working one If anyone can help me  on where to get one or even make me an offer I'd be very satisfied.

Title: Re: Need broken V6K
Post by frank-bao on 04.09.05 at 11:05:25
well. it is quite hard to find a v5 6k functions, but the broken one as well.

sometimes on ebay ,but have not seen this for a long time...


Title: Re: Need broken V6K
Post by st4r4m4m4 on 04.09.05 at 11:27:17
Well I was thinking more about finding a private seller, in case anyone would want to sell a "spare" nonworking V6K

Title: Re: Need broken V6K
Post by frank-bao on 04.09.05 at 11:36:02
but i think the price of v5 6k working and non-working are very similar, even the broken one is more expensive than working depend on the version

we all know 3700a is more common and 2600 A2 is more rare than 3700a

Title: Re: Need broken V6K
Post by st4r4m4m4 on 04.09.05 at 13:15:24
Well afaik the most common revs. can be below 150$ if not working.

Title: Re: Need broken V6K
Post by gdonovan on 04.09.05 at 13:45:45

wrote on 04.09.05 at 13:15:24:
Well afaik the most common revs. can be below 150$ if not working.


I have never seen a V6K below $500, working or not with typical prices running $1300.

For $150 I'll buy every single one you can find.

Title: Re: Need broken V6K
Post by st4r4m4m4 on 04.09.05 at 13:48:01
Hm well if so, rumors were wrong :P
Again if so, it would be better to go for a working one if there is no big difference in prices.

Title: Re: Need broken V6K
Post by gdonovan on 04.09.05 at 14:55:34

wrote on 04.09.05 at 13:48:01:
Hm well if so, rumors were wrong :P


Most of the time rumors usally are  ;)

Title: Re: Need broken V6K
Post by Chosen_One on 04.09.05 at 18:35:58
lol...a v5 6k for 150 US$? as gary said...almost impossible...
do not forget....the 3700 is also a protype and there are only a few hundred out there...

Title: Re: Need broken V6K
Post by Obi-Wan_Kenobi on 04.09.05 at 20:31:56
haha 150 USD, that would be a dream for every 3dfx fan out in the Gallaxy!

nah mostly between 800 and 1600 Euro's it really depends on the seller really ;)

Title: Re: Need broken V6K
Post by st4r4m4m4 on 04.09.05 at 21:04:26
Well I'm not much into details on V6K prices, but I just read somewhere that a nonworking V6K is worth about 100eur.

Title: Re: Need broken V6K
Post by gdonovan on 04.09.05 at 21:15:19

wrote on 04.09.05 at 21:04:26:
Well I'm not much into details on V6K prices, but I just read somewhere that a nonworking V6K is worth about 100eur.


LIke I said- I'll take every one you can find at that price.

Perhaps you read about that price on an Nvidia board  ;D


Title: Re: Need broken V6K
Post by st4r4m4m4 on 04.09.05 at 22:54:19
Well thx for the info...
It'll be a hard one on this V6K and I'm just about to quit my job :P
Hope I find some good payed part time job while studying, if not I'll have to wait 4 years to get one when I'll be (an employed) engineer

Title: Re: Need broken V6K
Post by edmundoab on 05.09.05 at 07:33:52
ahh good luck man

in anycase, about a year on ebay
they use to go for around 300 US for a non working card

maybe u cant get that price now.. who knows

Title: Re: Need broken V6K
Post by paulpsomiadis on 05.09.05 at 20:36:16
@st4r4m4m4 - post a new "WANTED" thread in the Marketplace forum... ;) ;D

...sorry I can't help with this though! V6K's are REALLY tough to find! :'(

Title: Re: Need broken V6K
Post by Obi-Wan_Kenobi on 05.09.05 at 20:44:18
hmm maybe, it realy depends on how you look for them ;) the Velocity 200 was also very hard to find, the point is you just have to know the right people ;) But Yes Paul it can be very thrustrating at times lad, I suppose that patience [not the person ;) ] is the biggest importance to alot of things.  8)

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.