3dfx Archive - Card running hot

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › 3dfx Section › Tech Talk › Card running hot

(Moderators: FalconFly, NitroX infinity, gdonovan)

‹ Previous Topic | No Topic ›

Pages: 1

Card running hot (Read 359 times)

Baoser Guest	Card running hot 09.08.02 at 08:02:24 The heastsink on my Voodoo 3 seems to be running very hot. I attached a CPU fan to the heatsink as I wanted to overclock it but it remains uncomfortable to the touch even at stock speed. Should the heatsink be that hot ?
Back to top	IP Logged

fuztec25

YaBB Newbies

Offline

Yeah, Voodoo5 is looong
way to go!!! ;-)

Posts: 4
Italy
Gender: male

Re: Card running hot
Reply #1 - 09.08.02 at 19:33:36

Baoser,
the Voodoo3 (and its counterpart from nVidia, the TNT2) was (were) the HOTTEST cards ever produced for an home computer environment.

Despite of the high temperatures, you shouldn't be worried about that unless you have a good airflow recirculation inside your case (wich helps more than having a blowby fan installed on your Voodoo3: even if this can really help too).

The only thing I can say is that I was used to measure 66 to 72 degrees C on my Voodoo3 but never had a single problem (and during the winter season it helped keeping the room at the right temperature Tongue

).

Anyway, unless You are trying to hard overclocking Your card, I can say that it is quite normal if you would feel your heatsink being so hot.

CheerZ, Fuz!

P.S.: Don't know a solution for You: I hope the guys could tell You more about this issue.

Is M$ the answer?&&M$ is the question....&&The answer is NO!!!

IP Logged

procerus Full Member Offline Voodoo2 Monomaniac Posts: 189	Re: Card running hot Reply #2 - 10.08.02 at 00:06:23 I don't know if it will necessarily do any better than a CPU cooler but Tennmax products are good (I've used their Voodoo2 cooler). http://www.tennmax.com/voodoo3/stealth_v3.htm
Back to top	98lite with 629K of free conventional memory in full DOS mode using QEMM 9.0 (or 628K with UMBPCI.SYS providing real mode for FastVid) with SmartDrive, CD-ROM, CuteMouse, sound support and UniRefresh all loaded high. IP Logged

Baoser Guest	Re: Card running hot Reply #3 - 10.08.02 at 11:36:53 OK, I've removed the blanking plate next to the AGP slot now. Hopefully that will let some cool air in and hot air to escape. Guess I just needed re-assurance that the card wasn't going to give up the ghost anytime soon. I only got the card off ebay a few weeks back.
Back to top	IP Logged

FalconFly

YaBB Administrator

Offline

3dfx Archivist

Posts: 2445
5335N 00745E
Gender: male

Re: Card running hot
Reply #4 - 10.08.02 at 12:39:57

I still run 2 Voodoo3's in my Network (V3-3000 and V3-3500/TV).

Those are really running quite hot as well, but they do so since years, and survived even the longest LAN sessions, without ever crashing or glitchting...

So I guess it's normal, although I remember that whether they run hot or cool depends somehow on the Motherboard they're used in.

I remember very well the day I switched from older Socket7 Boards (they almost never became really hot in there) to more modern Boards, and instantly noted those cards all of a sudden were running very hot (even in idle, no 3D used).

After losing half a dozen 486 Fans I mounted on them, I finally let them go as they were, and never had any problems.

I guess they are the most rugged hardware I've seen in my life, looks like they can easily take the heat Wink

Greetings
FalconFly

WebMaster FalconFly Central 3dfx Archive

IP Logged

nudgegoonies

Full Member

Offline

C64

Posts: 182
Germany
Gender: male

Re: Card running hot
Reply #5 - 10.08.02 at 14:13:00

I don't have much space between my Voodoo 1 and my SCSI so i use a Cooler from an old Powersupply. I use a long screw with a bolt fixed one slot under the Voodoo for better air circulation.

Regards,
Andreas

Board: Asus CUSL-2-C (Chipset: Intel i815), CPU: Intel PIII 933, RAM: 2 Infineon 128MB (1 PC133-333, 1 PC133-222) and 1 Infineon 256MB (PC 333-333) SD-RAM, Video: 3dfx Voodoo 3 3000 AGP, TV: LifeView FlyKit (Chipset: BT848, Tuner: No), Sound: Creative Labs Soundblaster PCI 512, NET: 3COM Etherlink XL Combo OS: Windows 98SE with SESP21D, Video Driver: 1.07.00 with GLIDE and OGL from 1.07.00b

IP Logged

recoton YaBB Newbies Offline I love YaBB 1G - SP1! Posts: 25	Re: Card running hot Reply #6 - 10.08.02 at 21:50:35 i would suggest getting some heat sink grease from your your local computer dealer ,he probably would even give you a dab which is all you need than at least you would have a more stable chip for overclocking and it draws the heat right out of the chip. its worth a try
Back to top	IP Logged

Pages: 1

‹ Previous Topic | No Topic ›

« Home

‹ Board

Top of this page