How many Voodoo5 proto's were there, well here the ones I do know of:

3dfx Voodoo5 5000 AGP x4 Rev.A0 3300
3dfx Voodoo5 5000 AGP x4 Rev.A0 3700
3dfx Voodoo5 5000 PCI Rev.A1 0900

3dfx Voodoo5 5500 AGP Rev.A1 4199 the Comdex 1999 card.
3dfx Voodoo5 5500 AGP Rev.A0 1400 AGP x2 prototype
3dfx Voodoo5 5500 AGP x4 Rev.A1 3300 no DVI
3dfx Voodoo5 5500 AGP x4 Rev.A2 3700 no DVI
3dfx Voodoo5 5500 AGP x4 Rev.A2 3300 + DVI

3dfx Voodoo5 6000 AGP Rev.A1 4999-41 2x2 card with Intel Bridge chip. Comdex 1999 Prototype

Intel Revision series.
3dfx Voodoo5 6000 AGP Rev.A0 0700
3dfx Voodoo5 6000 AGP Rev.A1 1500
3dfx Voodoo5 6000 AGP Rev.A1 1700
3dfx Voodoo5 6000 AGP Rev.A1 1900

Hint Series 1
3dfx Voodoo5 6000 AGP Rev.A2 2600 with 5,4 ns ram
3dfx Voodoo5 6000 AGP Rev.A2 2600
3dfx Voodoo5 6000 AGP Rev.A2 2700

Hint series 2
3dfx Voodoo5 6000 AGP Rev.A3 3400
3dfx Voodoo5 6000 AGP Rev.A3 3500

Hint Series 3
3dfx Voodoo5 6000 AGP Rev.A 3600
3dfx Voodoo5 6000 AGP Rev.A 3700
3dfx Voodoo5 6000 AGP Rev.A1 3700
3dfx Voodoo5 6000 AGP Rev.A2 3700
3dfx Voodoo5 6000 AGP Rev.A3 3700 with 5,4 ns Ram
3dfx Voodoo5 6000 AGP Rev.A 3900 ??? dunno heard it from an aussie

as far as I know these are all the Voodoo5 proto's if there are more, please fill in the listing

Here the funny part,  I couldn't find any listings of photo's of Voodoo5 5500 PCI proto cards,wierd huh 

Cool , a  Rev.A3 3000 would be more in the right way

the Rev A has slower ram? hmm..
must have ran out of Toshiba ones

You must be the same hiero looking for a REV 1 in the ezboard forums.
Any luck so far?

Quote:



Which is newer, Rev.A3 3700 or Rev.A 3900?

As far as I know the Intel revisions do NOT have soldering holes for the internal hook-up. So you are limited to the power brick...

The Internal hookup can only be applied on A2 or higher builds. The intels have voltage regulators on the place where Hank attaches the internal wires (well sort of, I know it's not exactly the same....). 



@ Obi-Wan_Kenobi:

I think you meant Rolo's old connector. I remember Rolo made a connector for his four pin powerconnector. VMAN once uploaded the pinout for that connector. I may still have that image on my HDD. I could not find any picture of it since voodooalert seems to be offline since yesterday. Anyway I think Enrico got it from Rolo to use it for a 1500. Ironically nobody seemed to have the nerves to really test it