3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl This & That >> Marketplace >> [W] 3dfx cards http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1337428132 Message started by Varus on 19.05.12 at 13:48:52

Title: [W] 3dfx cards
Post by Varus on 19.05.12 at 13:48:52

WTB some 3dfx cards:

PowerColor EvilKing IV TV
Evate Voodoo4
PowerColor EvilKing 3 Extreme
ASUS Voodoo3 boxed version
Leadtek Winfast 3D S310 (banshee)
MSI MS4427 (banshee)
ViewTop VulcanX (rush dual board)
Skywell Magic3D plus (V1 8MB)

Voodoo3 AGP prototype black PCB
Voodoo5 5500 AGP 4x prototype

Best Regards,
Lukas

Title: Re: [W] 3dfx cards
Post by ultima on 17.12.12 at 13:35:58

Hey Varus,

I might have some cards you'd like :)

you still looking for any of these??

Title: Re: [W] 3dfx cards
Post by masterj85 on 17.12.12 at 19:54:25

Hy, i have two of the cards they you want.

look:http://www.abload.de/thumb/20121217_194535qukew.jpg

This two cards are very nice and rare. The Evate V4 w/o TV more then the Powercolor.

Because of this, they are was not cheap for me.

How munch is your offer?

Title: Re: [W] 3dfx cards
Post by Varus on 17.12.12 at 21:14:31

Hi,
I'm sorry for the mistake, but i have this cards in my collection.

The list of cards i'm looking for has been updated.

Best Regards,
Lukas

Title: Re: [W] 3dfx cards
Post by ultima on 17.12.12 at 21:57:34

have a look at this picture.....is that an EvilKing 3 Extreme??

http://www.abload.de/image.php?img=img3045tob8.jpg

Title: Re: [W] 3dfx cards
Post by NitroX infinity on 17.12.12 at 22:19:17

EK3 Extreme runs at 183MHz. If there's no 183 marking on it, then you're gonna have to test it.

Title: Re: [W] 3dfx cards
Post by ultima on 17.12.12 at 22:22:05

so the one with 166 on it is the Pro??

Title: Re: [W] 3dfx cards
Post by NitroX infinity on 17.12.12 at 22:29:22

Yes, but it's my guess the other one is also a Pro at 166MHz. But again, put it in a machine and see at what speed it's working.

Title: Re: [W] 3dfx cards
Post by ultima on 17.12.12 at 23:11:16

What program is mst reliable for reading it's speed?? Everest? 3Dfx tools? Gpu-z??

Title: Re: [W] 3dfx cards
Post by NitroX infinity on 17.12.12 at 23:56:22

Everest would do fine. GPU-Z is a horror with older cards :P

Title: Re: [W] 3dfx cards
Post by Varus on 18.12.12 at 15:27:44

Hi,
Ultima, please check those two cards and let me know what do you have.

Best Regards

Title: Re: [W] 3dfx cards
Post by ultima on 18.12.12 at 15:36:16

1 of them is a Pro for sure, the other one I will check tonight.

it DOES have 5.5ns ram, so it COULD BE an Extreme, but hope is dwindling. :( it is identical to the other card.

but will test tonight and let ya know.

But MasterJ85 also showed intrest in one of the cards, I don't know which one he would want. if he wants the one with the 166 marking, then he is good to go I guess :)

Title: Re: [W] 3dfx cards
Post by ultima on 18.12.12 at 21:14:51

I checked the card without markings, Everest reports it being a 166Mhz part, so no EK3 Extreme, just a Pro.

But still, it does have the ram to run at extreme speeds. :)