3dfx Archive - defective voodoo 5-6000

hutzeputz

Junior Member

Offline

3dfx never Dies

Posts: 52
Gender: male

defective voodoo 5-6000
11.04.09 at 15:35:32

I made photos
I apologise for my bad English

who can help me technical details?

defective:

older pic:

I will leave the current port also exchange
soldering cold Centre....
http://www.3dfx-voodoo.de/bilder/08-04-09.7z
picture to v56k.

please help.

I need exactly label (R19 Resistor)

This shop is in cities near:

http://www1.conrad.de/

which resistor?

or this:

SMD resistor 4K7 1% 0805
Art.-Nr.: 428043 - 62 0805 4.7 kΩ SMD 0.125 W 1 %

Technische Daten
Ausführung: SMD
Bauart: Dickschicht
Bauform: 0805
Kategorie: Festwiderstand
Toleranz: 1 %
Widerstand: 4.7 kΩ
Temperatur-Koeffizient: 100 ppm
Belastbarkeit: 0.125 W
Weitere technische Daten: Reihe E 24
RoHS-konform: Ja

is each v56k 3700er this resistor?

Back to top

3dfx / Voodoo5-6000 System &&&&www.3dfx-voodoo.de

IP Logged

paulpsomiadis God Member Offline -=3Dfx still rox!=- Posts: 2011 Newcastle U.K. Gender:	Re: defective voodoo 5-6000 Reply #1 - 11.04.09 at 16:23:07 @Hank - if you are out there, do you know the value of R19 on the V6K?
Back to top	-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+ IP Logged

hutzeputz Junior Member Offline 3dfx never Dies Posts: 52 Gender:	Re: defective voodoo 5-6000 Reply #2 - 11.04.09 at 16:26:55 I found a company... here with me near... but I need all technical detail.
Back to top	« Last Edit: 11.04.09 at 17:15:52 by hutzeputz » 3dfx / Voodoo5-6000 System &&&&www.3dfx-voodoo.de IP Logged

elfuego Senior Member Offline Searching for V5 6k... Posts: 420 Aachen, Deutschland Gender:	Re: defective voodoo 5-6000 Reply #3 - 22.04.09 at 13:19:10 paulpsomiadis wrote on 11.04.09 at 16:23:07: @Hank - if you are out there, do you know the value of R19 on the V6K? Cant someone measure it? Find a guy who possesses V5 6k and ask him to do it. That shouldn't be such a big deal.
Back to top	Take the Magic: The Gathering 'What Color Are You?' Quiz. IP Logged

paulpsomiadis God Member Offline -=3Dfx still rox!=- Posts: 2011 Newcastle U.K. Gender:	Re: defective voodoo 5-6000 Reply #4 - 22.04.09 at 14:59:56 In order to measure the value CORRECTLY, it will have to be desoldered THEN tested... "in circuit" values are not correct... So it may actually be a big deal...
Back to top	-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+ IP Logged

elfuego

Senior Member

Offline

Searching for V5 6k...

Posts: 420
Aachen, Deutschland
Gender: male

Re: defective voodoo 5-6000
Reply #5 - 23.04.09 at 14:18:23

paulpsomiadis wrote on 22.04.09 at 14:59:56:

In order to measure the value CORRECTLY, it will have to be desoldered THEN tested... Shocked

"in circuit" values are not correct... Roll Eyes

So it may actually be a big deal... Undecided

I wasnt really aware of that. As far as I've learned, as long as the circuit is not running, the value should be the same.
http://www.electro-tech-online.com/general-electronics-chat/17459-measuring-resi...

Back to top

Take the Magic: The Gathering 'What Color Are You?' Quiz.

IP Logged

paulpsomiadis God Member Offline -=3Dfx still rox!=- Posts: 2011 Newcastle U.K. Gender:	Re: defective voodoo 5-6000 Reply #6 - 23.04.09 at 16:24:20 If you look in the tread you posted it says that IF you disconnect ONE END of the component then it's the same as having it out of circuit. But with SMT components this isn't possible (too small) so they have to be desoldered. BTW - I've been soldering for over 20yrs, so I know what I'm talking about...
Back to top	-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+ IP Logged

elfuego

Senior Member

Offline

Searching for V5 6k...

Posts: 420
Aachen, Deutschland
Gender: male

Re: defective voodoo 5-6000
Reply #7 - 24.04.09 at 21:29:31

paulpsomiadis wrote on 23.04.09 at 16:24:20:

If you look in the tread you posted it says that IF you disconnect ONE END of the component then it's the same as having it out of circuit. Roll Eyes

But with SMT components this isn't possible (too small) so they have to be desoldered. Undecided

BTW - I've been soldering for over 20yrs, so I know what I'm talking about... Wink

Good to know, 10x - I'm learning all the time

Back to top

« Last Edit: 24.04.09 at 21:29:52 by elfuego »

Take the Magic: The Gathering 'What Color Are You?' Quiz.

IP Logged

hutzeputz Junior Member Offline 3dfx never Dies Posts: 52 Gender:	Re: defective voodoo 5-6000 Reply #8 - 24.04.09 at 23:34:05 i know that the damaged resistor is the one mentioned above and i can have it repaired by a company i know. I already have a new resistor. I lack information whether additional technical details should be checked ..... thanks
Back to top	3dfx / Voodoo5-6000 System &&&&www.3dfx-voodoo.de IP Logged

hutzeputz Junior Member Offline 3dfx never Dies Posts: 52 Gender:	Re: defective voodoo 5-6000 Reply #9 - 08.05.09 at 18:07:18 Hier die Fotos nach dem Löten
Back to top	3dfx / Voodoo5-6000 System &&&&www.3dfx-voodoo.de IP Logged

rottentreats God Member Offline 3dfx > Reality Posts: 616 Minnesota [USA] Gender:	Re: defective voodoo 5-6000 Reply #10 - 08.05.09 at 19:38:17 Functional again?
Back to top	IP Logged

hutzeputz Junior Member Offline 3dfx never Dies Posts: 52 Gender:	Re: defective voodoo 5-6000 Reply #11 - 08.05.09 at 20:21:48 no work no bootscreen hmmmm
Back to top	3dfx / Voodoo5-6000 System &&&&www.3dfx-voodoo.de IP Logged

AzzKickr Junior Member Offline I'll be back Posts: 70 Belgium-Europe Gender:	Re: defective voodoo 5-6000 Reply #12 - 18.05.09 at 11:05:47 I would send over the board to paulpsomiadis ? With over 20 years of soldering experience it would be in good hands in order to try and revive it ... There must be way to measure where the problem is ...
Back to top	Retro gaming rig: V5 5500 AGP on MSI KT3 Ultra-ARU, XP3200+, 1.5GB DDR, Aureal Vortex SQ2500 sound (A3D !!), 400GB IDE Main game rig: FX8350 @ 8x4.7Ghz, 2x GTX580 Matrix SLI IP Logged

paulpsomiadis God Member Offline -=3Dfx still rox!=- Posts: 2011 Newcastle U.K. Gender:	Re: defective voodoo 5-6000 Reply #13 - 18.05.09 at 15:46:43 I would not want to mess around with a Voodoo 6000, as: 1) It is too precious 2) I am not qualified as a 3Dfx engineer 3) I have never repaired a Voodoo 6000 before (only a 5500). @Hank - please respond if you're listening!!!
Back to top	-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+ IP Logged

hutzeputz

Junior Member

Offline

3dfx never Dies

Posts: 52
Gender: male

Re: defective voodoo 5-6000
Reply #14 - 30.05.09 at 00:21:21

v6k Team forum:

[quote author="hanksemenec"

Hi,

I need a little more history behind the card.

I'll have to dig up the layout files and take a look at R19 function.

Did the card ever work?

If not I can guide you through some troubleshooting.

Hank [/quote]

[quote author="hutzeputz"

I own the Card since 2004 and it runs properly until 6 month ago. The only problem was the resolution doesen't come over 1024x 768, because the system crashes if I tried some higer resolution.

Except the failure with the 1024x768 resolution IN GAMES, the card works properly with 8XFSAA many hours in row. It would be very nice, you could help me. There is a company i know, they could do the hardware work from the guidance you give.

The time, the problems occur first is approximately 6 month ago. With the "no VGA" beep, butwith a reset or power cycle at the PC and a pausing of 5 minutes, the card boots up sometimes. Then the card needs hours for startup, and now it doesen't run any more.

[/quote]

I wait since then to reply.

I still hank is log hope....

Back to top

« Last Edit: 30.05.09 at 00:24:04 by hutzeputz »

3dfx / Voodoo5-6000 System &&&&www.3dfx-voodoo.de

IP Logged

	Welcome, Guest. Please Login
	News: Forum Registration Status : Closed