3dfx Archive - Identifying this V5500

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › General Section › General Discussion › Identifying this V5500

(Moderators: FalconFly, gdonovan, NitroX infinity)

‹ Previous Topic | Next Topic ›

Pages: 1

Identifying this V5500 (Read 296 times)

PhoZy YaBB Newbies Offline Ping Pong! Posts: 24	Identifying this V5500 18.10.03 at 11:20:44 I brought a v5500 off ebay,and it is my first 3dfx card.I notice some special with this board is that it come with both vga and dvi out.But while serving over the net.i could only locate v5500 with vga out and i really want to know why my card is so "special".
Back to top	IP Logged

PhoZy YaBB Newbies Offline Ping Pong! Posts: 24	Re: Identifying this V5500 Reply #1 - 18.10.03 at 11:31:11 How do if find out whether is this the mac version?btw i have the drivers,i'm using amiga 3.0 on winxp.
Back to top	IP Logged

Lecram25

Full Member

Offline

DOUBLE the Processor
DOUBLE the Bandwidth

Posts: 212
Melbourne, FL, USA
Gender: male

Re: Identifying this V5500
Reply #2 - 18.10.03 at 11:32:54

Well if it's not a PCI card, it could be one of those "rare" engineering boards...

IP Logged

PhoZy YaBB Newbies Offline Ping Pong! Posts: 24	Re: Identifying this V5500 Reply #3 - 18.10.03 at 11:39:44 Can i have a pic of the mac boards,both back and front.I want to verify.
Back to top	IP Logged

PhoZy YaBB Newbies Offline Ping Pong! Posts: 24	Re: Identifying this V5500 Reply #4 - 18.10.03 at 12:10:44 Ok,i manage to find out that this is the mac version.So is there any difference between the mac and the pci version?(As i heard that the mac version has very poor performance)
Back to top	IP Logged

NuAngel

YaBB Newbies

Offline

Angel^Nu

Posts: 13
Erie, PA
Gender: male

Re: Identifying this V5500
Reply #5 - 07.12.03 at 19:43:44

I know the thread is about two months old, but I thought I'd throw some stuff in:

The card IS a Mac card.

The DVI-out MIGHT or MIGHT NOT work. It will depend on the BIOS the seller used to flash the card.

The only difference between the PCI PCV5 and the MacV5 is the DVI out port and the BIOS. The guy on ebay probably picked up a bunch of Mac V5's pretty cheap and flashed them to the PC BIOS and resold them, because PCI V5's were, for a long while, selling really high on eBay (since they really are some of the most powerful PCI graphics cards you can get).

You should be good, all should work well, and enjoy your trip back in time with the Voodoo!

IP Logged

FalconFly YaBB Administrator Offline 3dfx Archivist Posts: 2445 5335N 00745E Gender:	Re: Identifying this V5500 Reply #6 - 07.12.03 at 20:22:31 Hm, interesting to read, since I just got myself one of those (with a bit of luck, the seller will even find its original Packaging ) It'll be interesting to see if that good old Voodoo5 DVI works with a PC Bios (or even the DVI Connector, but I don't know if there's any special Bios existing for it)
Back to top	WebMaster FalconFly Central 3dfx Archive IP Logged

NuAngel

YaBB Newbies

Offline

Angel^Nu

Posts: 13
Erie, PA
Gender: male

Re: Identifying this V5500
Reply #7 - 13.12.03 at 18:20:03

Not just the 1.18, but a modded version of the 1.18.

http://welcome.to/3dfxBIOS - he'll have it, whenever his site gets back online (there seems to be a long delay when going to web pages). Under the Voodoo 5 5500 PCI for PC you'll see a 1.18 and a 1.18 WITH DVI OUT SUPPORT. You oughtta be able to do something with that, although I've never had a chance to see it in action. Wink

NuAngel

« Last Edit: 13.12.03 at 18:22:53 by NuAngel »

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page