3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> 3dfx Drivers >> Voodoolizer 1.05.00 for win 9x/Me
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1070307287

Message started by Fantasma on 01.12.03 at 20:34:47

Title: Voodoolizer 1.05.00 for win 9x/Me
Post by Fantasma on 01.12.03 at 20:34:47
Have passed a lot of time since the last time I looked for 3dfx drivers.   ;)
Well, I have tried this drivers and seems to work great with a good image quality. I recommend this driver for the v3. They are very stable.  :D

Title: Re: Voodoolizer 1.05.00 for win 9x/Me
Post by Fantasma on 01.12.03 at 21:34:18
I have made some comparison between this drivers and the 1.07.00 original drivers, the different files are:
3dfx16vs.drv
3dfxOGL.dll
glide2x.dll
glide3x.dll
These are the files that I could observe different sizes in win 9x/me.
I suppose that the glide files are the koolsmoky ones or the colourless ones, same to the opengl driver but the directx driver have change a bit, maybe, that change have improve something. I have tried them and I like them more than the amigamerlin 2.9 I have been using until now.
;)

Maybe itīs all product of my mind  ;D

Title: Re: Voodoolizer 1.05.00 for win 9x/Me
Post by FalconFly on 01.12.03 at 22:33:45
To be honest :

Even if they (magically) turned into highly qualified Programmers and Driver magicians...

...with their reputation (if it ever existed) ruined to eternity, confirmed cheating, lying and betraying the 3dfx Users on complete multiple "Driver series" in the past, never... on earth... could I recommed their rip-off's of other 3rd Party Drivers to anyone in the world.

(their activities were reproduced and confirmed down to bit level by several people, beyond any doubt)

I'd rather check what Driver they did the plagiat on, and use that original instead (seems the more correct way of doing things).

No support for these people will ever come from my side, for above reasons ::)

PS.
I can still see some of their "supporters" create Spam Postings in various Forums from time to time; it seems they really didn't stop, even after their cover blew up and they got torn to pieces for it :P

Title: Re: Voodoolizer 1.05.00 for win 9x/Me
Post by Fantasma on 01.12.03 at 23:37:52
:-X
In that case, Iīll use the amigamerlin 2.9 drivers again, really I didnīt see much difference between those two and amigamerlin do a hard work and a good job in their drivers. :D

Title: Re: Voodoolizer 1.05.00 for win 9x/Me
Post by Fantasma on 02.12.03 at 01:09:14
I have realised that the voodoolizer is exactly the same as amigamerlin 2.9 driver except for the use of the last glides.

Those guys sucks  >:(

Title: Re: Voodoolizer 1.05.00 for win 9x/Me
Post by ElvIsAlive on 22.12.03 at 19:51:26
theres drivers caused me some bad problems in certain games

i even contacted them all through icq from there page and asked them why they copyed poor koolsmokey coded dlls without even asking or even have the cheek to say they used his coded dlls

Yes voodooliser are now dead are these guys pissed a lot people off

maybe they can revamp the driver name to something else and make freinds with amigamerlin and koolsmokey and they can regain the good name in drivers they once had

Really there egos of programming is pathic

they can goto coloress site and get glide3dfx source code and build there own drivers

that more likey would be beyond there dreams so they copyed code from good old jap koolsmokey

funney the germans copying the japs

HEHEEHEHE

Regards

ElvIsAlive


3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.