3dfx Archive - Voodoo BIOS

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › 3dfx Section › 3dfx Drivers › Voodoo BIOS - AGP or PCI???

(Moderators: gdonovan, FalconFly, NitroX infinity)

‹ Previous Topic | Next Topic ›

Pages: 1

Voodoo BIOS - AGP or PCI??? (Read 281 times)

Chosen_One Senior Member Offline Keeper of the BIOS-files... Posts: 499 Germany Gender:	Voodoo BIOS - AGP or PCI??? 12.12.04 at 13:33:54 well...i have many bios from v3 1k till v5 6k! especially the v3 bios confuse me! where can i see if its an AGP or PCI bios? i only can divide them into SG-RAM and SD-RAM but not in AGP/PCI! even in the tdfx bioseditor i have no clue about this! any ideas?
Back to top	3dfx BIOS-Database IP Logged

gamma742 God Member Offline 3Dfx Gamer Posts: 1668 San Diego, CA USA Gender:	Re: Voodoo BIOS - AGP or PCI??? Reply #1 - 13.12.04 at 03:36:43 Chosen_One Have you tried here... http://welcome.to/3dfxBios
Back to top	Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best... IP Logged

Chosen_One Senior Member Offline Keeper of the BIOS-files... Posts: 499 Germany Gender:	Re: Voodoo BIOS - AGP or PCI??? Reply #2 - 13.12.04 at 21:12:28 ohh....banshee bios... but there you cannot see if my v3 sd-ram or sg-ram bios is agp or pci! does this matter? falconfly also said this to me...but he wasnt sure...or is the main point the ram?
Back to top	3dfx BIOS-Database IP Logged

Chosen_One Senior Member Offline Keeper of the BIOS-files... Posts: 499 Germany Gender:	Re: Voodoo BIOS - AGP or PCI??? Reply #3 - 13.12.04 at 23:11:46 does it matter if its agp or pci? i mean can you flash any SD-RAM on your v3 2000 pci? of course not a sg-ram bios but does it matter which sd-ram bios you flash?
Back to top	« Last Edit: 13.12.04 at 23:13:14 by Chosen_One » 3dfx BIOS-Database IP Logged

gamma742

God Member

Offline

3Dfx Gamer

Posts: 1668
San Diego, CA USA
Gender: male

Re: Voodoo BIOS - AGP or PCI???
Reply #4 - 14.12.04 at 06:26:56

I have been told some time ago that it does not matter between AGP and PCI on the V3 But it is important to flash the correct memory SD vs. SG. I always tried to stay with the one that was correct on both accounts. Just the newest version, as I did not want people to think I hack a V3 2000 to a V3 3000 which it is definiately possible to do. If I wanted the 2K to perform like a 3K, I just install the OC utility and crank it up to 166MHz. For best results, add a 486 or chipset fan to the passive heatsink Wink

Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best...

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page