3dfx Archive - v3 3000 + fan, how much overclock?

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › 3dfx Section › Tech Talk › v3 3000 + fan, how much overclock?

(Moderators: FalconFly, gdonovan, NitroX infinity)

‹ Previous Topic | Next Topic ›

Pages: 1

v3 3000 + fan, how much overclock? (Read 197 times)

RaptorZX3 Full Member Offline Canadian 3DFX user Posts: 218 Montreal, Quebec (Canada) Gender:	v3 3000 + fan, how much overclock? 19.11.13 at 11:38:53 i found a fan i can use on my V3 3000, either AGP or PCI. It's a fan that was used on a Pentium 1 CPU cooler. Now i wonder...if overclocking is a heat problem only for the card, how much overclocking i could put on that card? note: this board have PCI only (Asus MEW-AM), this is why i use a PCI card on this one...
Back to top	« Last Edit: 19.11.13 at 11:40:18 by RaptorZX3 » IP Logged

ultima

God Member

Offline

Always searching

Posts: 876
The Netherlands
Gender: male

Re: v3 3000 + fan, how much overclock?
Reply #1 - 19.11.13 at 11:49:03

seeing that the card has -6 ram, which is rated for 166Mhz, I don't think you'll get much out of it, maybe if yer lucky you'll reach V3 3500 speeds (183Mhz) but I wouldn't get your hopes up.

In this case the limiting factor is the ram, V3 chips can run upto 200Mhz in some cases, but most will do 190 if I'm not mistaken.

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4

IP Logged

RaptorZX3 Full Member Offline Canadian 3DFX user Posts: 218 Montreal, Quebec (Canada) Gender:	Re: v3 3000 + fan, how much overclock? Reply #2 - 19.11.13 at 13:23:42 yeah since V3 2000, 3000 and 3500 all use the same GPU, i guess only the speed change on it. And i guess this is why they shrunk the heatsink for the 2000, so it would be harder to overclock it.
Back to top	IP Logged

ultima

God Member

Offline

Always searching

Posts: 876
The Netherlands
Gender: male

Re: v3 3000 + fan, how much overclock?
Reply #3 - 19.11.13 at 13:37:02

Quote:

yeah since V3 2000, 3000 and 3500 all use the same GPU, i guess only the speed change on it.

That is true, they are all exactly the same GPU, aside from speed and a few features like tv-out and the break-out box of the 3500.

Quote:

And i guess this is why they shrunk the heatsink for the 2000, so it would be harder to overclock it.

Actually no, they did that to save costs, you might think that such a small difference in size can't make a difference, but take that little bit of metal and multiply that by millions, and you have a lotta metal on your hands.

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4

IP Logged

RaptorZX3

Full Member

Offline

Canadian 3DFX user

Posts: 218
Montreal, Quebec (Canada)
Gender: male

Re: v3 3000 + fan, how much overclock?
Reply #4 - 10.12.13 at 15:02:14

i tried overclocking the AGP version i have of the V3000 here, and tried the benchmark with Dethkarz, with the first track.

Without overclock (166Mhz): about 55fps average
With overclock (183Mhz): about 61fps average
(higher FPS on the 2 other tracks for both results)

Using latest official drivers.

Tried this on an Asus P3B-F rev1.03 w/latest beta BIOS (with 700Mhz 100FSB and later 1Ghz 133FSB overclocked 133 FSB/33 PCI, no change in performance on both reads, as the bottleneck is the GPU here)

I've put the fan you see in the picture on this V3000AGP as well, to keep it cool

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page