3dfx Archive - need a value of resistors for V5 5500

eloooos YaBB Newbies Offline --- Posts: 19 Poland Gender:	need a value of resistors for V5 5500 16.08.09 at 20:27:31 Hello. Anybody knows values of resistors (or it could be a capacitors?) C509, C510, C514, C516, C539 on V5500? My card lack this resistors, but works ok. Thank's for any help.
Back to top	« Last Edit: 17.08.09 at 20:52:02 by eloooos » IP Logged

sb306

Full Member

Offline

I hate Nvidia!

Posts: 154
Fresno ca, U.S.
Gender: male

Re: need a value of resistors for V5 5500
Reply #1 - 19.08.09 at 09:36:11

I have no idea about the values. But, its good to know that the card still works. A couple months ago I recieved a v5500 and it was missing a couple of caps near the molex connector. Ive since taken it and had an electronics tech store replace the caps with ones of similar values. I havent tried it yet. though. I just took a look at it and they were c76 and c90.

Just wanted to chime in.

Back to top

« Last Edit: 19.08.09 at 09:41:53 by sb306 »

Voodoo 5500 AGP, Amd Barton 2600 187x11, MSI KT3 Ultra, Soundblaster Live 5.1, 768MB Ram

IP Logged

eloooos YaBB Newbies Offline --- Posts: 19 Poland Gender:	Re: need a value of resistors for V5 5500 Reply #2 - 25.08.09 at 20:08:48 Nobody can help me?
Back to top	IP Logged

Backfire

YaBB Newbies

Offline

Posts: 17
Hannover, Germany
Gender: male

Re: need a value of resistors for V5 5500
Reply #3 - 01.09.09 at 04:35:03

Hello Eloooos.

I have one V5 5500 using for help several times this way. In the next days, assumed finding some time, I establish the values for you. I will desolder and measure them. Electronic parts marked with a "c" will be capacitors, for normal.

Further I want to use this posting to say Hello to this Falconfly community. New in this forum, but approximately two years active in VoodooAlert. Only giving a short overviev:
Coming from Germany near Hannover and working as Aircraft Engineer in Avionics and having 25 Years experience in Radio-TV technic.

So I hope I can do my contribution in this 3dfx community, following the philosophy to sharing knowledge between each other, for everyones advantage.

Many greetings
--Backfire--

Back to top

« Last Edit: 01.09.09 at 04:35:46 by Backfire »

IP Logged

akula65

Full Member

Offline

Don't Feed the Trolls

Posts: 155
Gender: male

Re: need a value of resistors for V5 5500
Reply #4 - 01.09.09 at 18:07:12

eloooos, It might also be helpful if you were to specify some additional information about your card. Is it PCI or AGP? Is it a retail card or OEM? Are there any markings that give information about the revision/version of the card? The values and/or presence of the capacitors you are interested might be different depending on the factors listed above, and you may be comparing apples and oranges if you don't get a good match with the person who provides you with the information you requested.

Back to top

IP Logged

Backfire YaBB Newbies Offline Posts: 17 Hannover, Germany Gender:	Re: need a value of resistors for V5 5500 Reply #5 - 01.09.09 at 19:57:14 Oh, yes. A good advice. It would be very helpful to take some closeup photos from the part positions and the card itself, front and back. If there could be seen, the layout is different, so I do not need to disassemble SMD parts of my "test/experimenting card". --Backfire--
Back to top	IP Logged

eloooos YaBB Newbies Offline --- Posts: 19 Poland Gender:	Re: need a value of resistors for V5 5500 Reply #6 - 01.09.09 at 22:18:39 It's a popular V5 5500 AGP, it's identic like a (picture) card from Komponent's topic about modding V5 5500 from 64 to 128MB memory. Thank's for any help P.S. C544 is also broken
Back to top	IP Logged

akula65 Full Member Offline Don't Feed the Trolls Posts: 155 Gender:	Re: need a value of resistors for V5 5500 Reply #7 - 02.09.09 at 01:27:39 All 6 capacitors are present on my U.S. retail card. By the way, all of the caps are on the back (non-fan) side of the card. I don't have a "test" card like Backfire, and I don't think I can manage the SMD parts with the soldering equipment I have, so I can't help with the values.
Back to top	IP Logged

Backfire

YaBB Newbies

Offline

Posts: 17
Hannover, Germany
Gender: male

Re: need a value of resistors for V5 5500
Reply #8 - 02.09.09 at 02:30:55

Hi.

No worries about. Tomorrow I attempt to take a hour for checking the values of the capacitors.
My old card I use for this, knows the sorrow. Wink

But until now, it didn't die.

But the only thing is strange for me: Whats going on, so much people have missing parts on this graphics cards. Huh

Ok, an Elko can be ripped off, but a flat little SMD?

--Backfire--

Back to top

IP Logged

eloooos YaBB Newbies Offline --- Posts: 19 Poland Gender:	Re: need a value of resistors for V5 5500 Reply #9 - 02.09.09 at 09:10:08 I think capacitors on V5 are very delicate, maybe someone before me, don't take care about card. For me is important that the card is still running with no problems, but i think that will be better when I solder capacitors where they needed.
Back to top	IP Logged

Backfire YaBB Newbies Offline Posts: 17 Hannover, Germany Gender:	Re: need a value of resistors for V5 5500 Reply #10 - 02.09.09 at 17:06:46 Here we go! There are the Values of the capacitors you requested: All, C509 / 510 / 514 / 516 / 539 are 100nF Types. Sadly one of the Capacitors gonna lost during the analyzing. But I can replace it. That's it. I hope I could help you. So Long --Backfire--
Back to top	IP Logged

eloooos YaBB Newbies Offline --- Posts: 19 Poland Gender:	Re: need a value of resistors for V5 5500 Reply #11 - 02.09.09 at 19:59:46 Backfire wrote on 02.09.09 at 17:06:46: I hope I could help you. Sure Big thanks for you
Back to top	IP Logged

Backfire

YaBB Newbies

Offline

Posts: 17
Hannover, Germany
Gender: male

Re: need a value of resistors for V5 5500
Reply #12 - 03.09.09 at 05:46:53

With pleasure.

I guess the cap's are for DC smoothing. When there signals passing through, then you have had serous problems with the card, for sure.
This may be the reason why the card is still operational, without the caps.
Have a close look on the card and lookout if you find some other damage.

But basically it's good to assemble the Parts where they belonging.

Bye
--Backfire--

Back to top

IP Logged

voodooban_cn YaBB Newbies Offline I love 3dfx Posts: 33 shang hai, China Gender:	Re: need a value of resistors for V5 5500 Reply #13 - 22.11.10 at 10:20:08 Yes,they are BYPASS Caps to snubber overshoot of voltage,and there will be no critical Fault without them,it just become unstable when OC.
Back to top	Opteron 250 X2/Tyan K8W /Infineon REG ECC DDR400 1G x3/Seagate 160GB+2 x WD 640GB/NMB 460W/Intel Tower/Nvidia 5950U/ECHO MIA MIDI/&&====================== IP Logged

	Welcome, Guest. Please Login
	News: Forum Registration Status : Closed