3dfx Archive - Need help getting an AA5 to work

Queso

YaBB Newbies

Offline

Cheezy 3dfx noob!

Posts: 33

Need help getting an AA5 to work
10.05.15 at 22:41:08

Hey everyone,
I've been collecting parts to make my own Aalchemy system. So far, it's been a pain to get the damn thing running right, but I got as far as getting the properties tab to show in windows xp. I'm glad that the psu and the card works seems to work fine, but I can't run the test. It gives me this error:
"LoadLibrary failed for file C:\windows\system32\obsidian2\glide3xr.dll: the specified module could not be found."

I'm a little new to this...but could someone please help point me into the right direction? thanks!

Back to top

Slowly starting my collection...

IP Logged

bucksavage

Full Member

Offline

Voodoo rocks!

Posts: 222
Ontario, Canada
Gender: male

Re: Need help getting an AA5 to work
Reply #1 - 11.05.15 at 04:58:52

Queso wrote on 10.05.15 at 22:41:08:

Hey everyone,
I've been collecting parts to make my own Aalchemy system. So far, it's been a pain to get the damn thing running right, but I got as far as getting the properties tab to show in windows xp. I'm glad that the psu and the card works seems to work fine, but I can't run the test. It gives me this error:
"LoadLibrary failed for file C:\windows\system32\obsidian2\glide3xr.dll: the specified module could not be found."

I'm a little new to this...but could someone please help point me into the right direction? thanks!

Sounds to me like XP is looking for the Glide part of your drivers, and can't find it. Now, if you installed it, and it can't find it, then that is a major issue. If you haven't installed them, then it won't work until you do.

Back to top

&&[url=http://ubanimator.com][img]http://img181.imageshack.us/img181/9504/userbar3130167aj.gif[/

IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: Need help getting an AA5 to work Reply #2 - 11.05.15 at 06:44:20 Install the latest AAlchemy display driver via WinXP device Manager, apply my registry fix to get the properties tab and you should be good to go. AA5 V4.6 driver: http://www.falconfly.de/downloads/Q3D_AA5_Aalchemy-v46.zip Registry fix for XP: http://www.falconfly.de/downloads/AA5_XP_Patch.rar
Back to top	IP Logged

Queso

YaBB Newbies

Offline

Cheezy 3dfx noob!

Posts: 33

Re: Need help getting an AA5 to work
Reply #3 - 13.05.15 at 21:32:25

Hmm...I do have the latest driver installed along with the registry fix. I also installed opengvs, and the same error shows when trying to run a benchmark.

Could it be possible that the problem comes from using a voodoo 5 as a primary display adapter? This motherboard doesn't like my geforce cards, so this is the only agp card that works.

Back to top

Slowly starting my collection...

IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: Need help getting an AA5 to work Reply #4 - 15.05.15 at 06:46:41 This could be the case, yes. You should try a different primary card.
Back to top	IP Logged

Queso YaBB Newbies Offline Cheezy 3dfx noob! Posts: 33	Re: Need help getting an AA5 to work Reply #5 - 04.06.15 at 06:03:37 Update: I finally got it to work! I'm using a matrox card and the same model motherboard but different physical board. I think the first one was causing me problems.
Back to top	« Last Edit: 04.06.15 at 06:06:21 by Queso » Slowly starting my collection... IP Logged

ultima God Member Offline Always searching Posts: 876 The Netherlands Gender:	Re: Need help getting an AA5 to work Reply #6 - 04.06.15 at 19:12:26 Just a note...never mix different 3dfx cards in a system, it won't know what card to use since they all use glide Was the same when using a voodoo3 + voodoo2 SLI......never worked
Back to top	3DFX Playrig: Aerocool Strike-X Air SuperMicro H8DAE Dual Opteron 280 @ 2.4Ghz (4 cores) 4 x 1GB PC3200 3DFX Voodoo5 5500MAC PCI WD 160GB ATA100/133 Diamond MonsterSound MX300 Windows2000 SP4 IP Logged

RCF YaBB Newbies Offline recent 3dfx enthusiast Posts: 5 Gender:	Re: Need help getting an AA5 to work Reply #7 - 05.06.15 at 21:58:54 ultima In the past, I have mixed 3dfx cards in the same system. V5 with V1 and V5 with V2. The glide version are different between this cards. There's a simple utility to switching the Glide files in the Windows system folder.
Back to top	IP Logged

ultima God Member Offline Always searching Posts: 876 The Netherlands Gender:	Re: Need help getting an AA5 to work Reply #8 - 05.06.15 at 23:17:43 Seriously?? I never knew that....do you have a link for it?
Back to top	3DFX Playrig: Aerocool Strike-X Air SuperMicro H8DAE Dual Opteron 280 @ 2.4Ghz (4 cores) 4 x 1GB PC3200 3DFX Voodoo5 5500MAC PCI WD 160GB ATA100/133 Diamond MonsterSound MX300 Windows2000 SP4 IP Logged

Queso YaBB Newbies Offline Cheezy 3dfx noob! Posts: 33	Re: Need help getting an AA5 to work Reply #9 - 06.06.15 at 05:06:18 well then, I guess I learned that the hard way. lol. That switching utility would be nice though!
Back to top	Slowly starting my collection... IP Logged

RCF YaBB Newbies Offline recent 3dfx enthusiast Posts: 5 Gender:	Re: Need help getting an AA5 to work Reply #10 - 06.06.15 at 05:29:55 To install, just take a look at the readme file. https://mega.nz/#!nxoUGLSC!2V_8PHt3K4RjvzloS1eTpHf4DQ_tLLmPz6en2q1veCE
Back to top	IP Logged

	Welcome, Guest. Please Login
	News: (To open a Registration window when closed, contact Admin (falconfly@ewetel.net)