3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl 3dfx Section >> 3dfx Drivers >> What driver for Obsidian 200SBi ? http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1106940445 Message started by TM30 on 28.01.05 at 20:27:25

Title: What driver for Obsidian 200SBi ?
Post by TM30 on 28.01.05 at 20:27:25

I need a driver for Win98... Fast Voodoo 2 does not seem to work...

i have direct x 8.1

Title: Re: What driver for Obsidian 200SBi ?
Post by FalconFly on 28.01.05 at 22:08:22

Have you tried the Quantum Obsidian2 90/200SB V5.1P Driver ?

Not sure, but the Registry Patch that allows (limited) usage of the 3dfx Reference Drivers on the X-24 should work as well on the SB200.

Title: Re: What driver for Obsidian 200SBi ?
Post by procerus on 29.01.05 at 18:58:00

The final reference driver (3.02.02) works perfectly here. The 200SBi was built to be seen as an ordinary Voodoo2 SLI setup to save Quantum3D's code jockeys much time and effort in their driver creation. The only proviso is that, due to memory timings, you may need to apply the registry patch as FalconFly says.