Welcome, Guest. Please Login 3dfx Archive
 
 
  HomeHelpSearchLogin  
 
  3dfx Archive › General Section › General Discussion › Problems with old Athlon system
(Moderators: FalconFly, gdonovan, NitroX infinity)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1
Send Topic Print
Problems with old Athlon system (Read 110 times)
whodovoodoo2man
YaBB Newbies
*
Offline


Cast a spell on you...!

Posts: 41
London
Gender: male
Problems with old Athlon system
31.03.05 at 15:56:08  
Hi,

I was given a couple of old machines a while back.

One was an old Compaq pentium 4 1.4GHz machine, and is working fine.

the other was an old Athlon 1.4 Thunderbird system based on a Abit KT7 mobo.

Both needed HD's, as the chap who gave them to me had culled them for his new machine.

The Athlon posted up okay, but everytime I have tried to load in the OS (Win 2000) it goes through the initial stage of load up, reboots and then refuses to go any further.

I think this is mobo problem, as the HD is new.

Any clues, or things I can try. I know it's an old system, but I just wanted to rig something for use at work,as those machines have been seriously nobbled by the IT department.

Andy
Back to top
 
 
IP Logged
 
NitroX infinity
YaBB Moderator
*****
Offline



Posts: 1936
The Netherlands
Gender: male
Re: Problems with old Athlon system
Reply #1 - 31.03.05 at 16:27:30  
Does it also happen with another OS like Windows 98se?
Back to top
 
WWW  
IP Logged
 
gamma742
God Member
*****
Offline


3Dfx Gamer

Posts: 1668
San Diego, CA  USA
Gender: male
Re: Problems with old Athlon system
Reply #2 - 31.03.05 at 23:17:31  
Quote:
This will result an AMD Athlon running at 1050MHz. The lower clock frequencies of your motherboard, ram and CPU won't stress the system as much as normal.
Don't forget to underclock your internal RAM too !   



Good advice, I was going to say "try swapping out the ram first".
Back to top
 
Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System.  Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best......
gamma742 https://www.facebook.com/bob.waller  
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Problems with old Athlon system
Reply #3 - 01.04.05 at 01:11:38  
A mate of mine had a similar problem with an EPIA mainboard and a brand new Samsung HDD. Roll Eyes

Turns out that the mainboard was incompatible with the HDD (the HDD worked fine in another PC) Tongue

So we just used a different HDD with the mainboard! Grin
Back to top
 
-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge